Skip to main content
Siemens 3RW5235-6AC15

Siemens 3RW5235-6AC15 SIRIUS Soft Starter, 68 A

MPN 3RW5235-6AC15
Active

Siemens SIRIUS 3RW5235-6AC15 soft starter, 68 A minimum setting, trip class 10A/10E/20E per IEC 60947-4-2, multi-protocol fieldbus, 200–600 V, screw fixing, 203 x 185 x 306 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5235-6AC15 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width185 mm
Height306 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

Sizing and Trip Class

The 3RW5235-6AC15 is a SIRIUS soft starter with a minimum settable motor current of 68 A, relative to the smallest settable Ie. The trip class defaults to CLASS 10A per IEC 60947-4-2, with selectable 10E or 20E — meaning it can be configured for standard (10A), electronic (10E), or extended (20E) overload protection curves. This lets you match the protection to the motor's starting profile: 10A for normal starts, 20E for high-inertia loads like fans or centrifuges. Rated operating voltage spans 200 to 600 V, covering common low-voltage motor supplies across 50/60 Hz networks.

Fieldbus and Control Integration

This soft starter supports PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET — five fieldbus protocols on one device. PROFINET includes PROFIenergy capability when paired with the standard communication module. The analog output is factory-set to 4–20 mA but can be parameterized to 0–10 V via the High Feature HMI. Remote reset is achieved by cycling the control supply voltage.

Mounting and Environmental Clearances

Mounting is by screw fixing onto a vertical surface. The unit is rotatable ±90° and tiltable ±22.5° front-to-back. Required clearances: 100 mm above, 75 mm below, 10 mm forward, 5 mm at the sides, and 0 mm backward. Shock resistance is rated at 15 g / 11 ms, dropping to 12 g / 11 ms if potential contact lifting is a concern.

MPN
3RW5235-6AC15