Skip to main content
Siemens 3SF3210-1DV00-0BA2

Siemens 3SF3210-1DV00-0BA2 Position Switch, AS-i, IP65, 1NC

MPN 3SF3210-1DV00-0BA2

Siemens SIRIUS 3SF3210-1DV00-0BA2, communication-capable position switch, block housing EN 50047, IP65, roller plunger actuator, positive opening 1NC, AS-i insulation displacement connection.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3SF3210-1DV00-0BA2 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Temp operating max60 °C
Temp operating min-25 °C
Sensing distancemechanical

Product details

The Siemens 3SF3210-1DV00-0BA2 is a communication-capable position switch with an integrated AS-i adapter, designed for direct connection to an AS-interface network without a separate gateway module. It uses a mechanical active principle with a roller plunger actuator and a positive-opening NC contact — the NC opens mechanically even if the contacts weld, which is the safety-relevant behavior required for interlock circuits on guards and access doors. The housing is a molded-plastic block design per EN 50047, fastened with screws, and rated IP65. That means it's dust-tight and protected against water jets — suitable for washdown areas in food processing or packaging lines where you need to hose down the machine perimeter without pulling the switch.

AS-i connection and wiring

Electrical connection is via the AS-i insulation displacement method — the flat cable pierces into the switch body, no separate T-piece or M12 drop cable required. This keeps the wiring count low on a long AS-i segment and simplifies panel layout when the switch is mounted directly on a machine frame rather than inside a control cabinet. The switch carries one NC auxiliary contact and no NO contacts. For a safety circuit that needs a positively-guided NC to signal 'guard closed', that's the only contact you need; the AS-i adapter handles the communication back to the safety monitor.

Environmental range and deployment

The molded-plastic enclosure handles the temperature swing without condensation issues inside the switch body.

MPN
3SF3210-1DV00-0BA2