Skip to main content
Siemens 4EP4010-0MS10

Siemens SIDAC 4EP4010-0MS10 Output Reactor, 76 A, 4 kHz

MPN 4EP4010-0MS10

Siemens SIDAC output reactor, 3-phase AC, 76 A max, 4 kHz switching frequency, 0.1 mH, IP00, free cable endings.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP4010-0MS10 specifications
ParameterValue
IP ratingIP00
Depth0.14 m
Width0.21 m
Height0.17 m

Product details

The Siemens SIDAC 4EP4010-0MS10 is a three-phase output reactor — an inductive choke placed between a variable-frequency drive and the motor to smooth the PWM waveform and limit voltage spikes on the motor windings. Rated for 76 A maximum continuous current and a 4 kHz switching frequency, with 0.1 mH inductance per phase, it protects the motor insulation from the sharp edges of a VFD output and reduces bearing-fluting currents in longer cable runs.

The 76 A maximum rating is the thermal current the reactor can carry continuously at 40 °C ambient, thermal class B (130 °C rise). For a drive running a motor at 68.4 A continuous (the listed I LN value), this reactor has headroom above the nominal load. The 4 kHz switching frequency matches the typical IGBT switching speed of many general-purpose VFDs. If your drive runs a higher carrier frequency, the reactor's core losses increase — derate the current or check the drive manufacturer's recommendation. Power loss splits into 42 W in the coil (copper losses from the winding resistance) and 33 W in the iron core (hysteresis and eddy-current losses). At 75 W total, it's warm but manageable in a ventilated enclosure — plan for some airflow around it.

Mount the reactor in the motor-output path between the VFD terminals and the motor cable. The free cable endings (stripped conductors) need to be terminated into a terminal block or directly to the drive and motor — no connector on the reactor itself. Dimensions are 0.21 m wide, 0.17 m high, and 0.14 m deep — roughly the size of a large brick. It's a panel-mount component; leave clearance around it for heat dissipation and cable bending radius.

MPN
4EP4010-0MS10