Skip to main content
Siemens 4EU3622-0EC00-1BA0

Siemens 4EU3622-0EC00-1BA0 Mains Choke, 871A, 480V, 3-Phase

MPN 4EU3622-0EC00-1BA0

Siemens SENTRON 4EU3622-0EC00-1BA0 mains choke (line reactor) for variable-frequency drives, 3-phase, 480V AC, rated 784A (max 871A), 0.019mH, 1.6% voltage drop, IP00, flat-type terminals, UL/CSA recognized.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU3622-0EC00-1BA0 specifications
ParameterValue
IP ratingIP00
Depth0.237 m
Width0.35 m
Height0.321 m

Product details

What this mains choke does for the drive line

The Siemens 4EU3622-0EC00-1BA0 is a three-phase mains choke (line reactor) for the input side of a variable-frequency drive. Rated 784 A continuous with a 871 A maximum at 47 Hz.

Rated current 784 A at 480 V AC, 3-phase, 47 Hz — thermal continuous rating at 50 °C ambient. The 871 A maximum figure reflects the short-time overload capability. Power loss splits into coil loss 268.9 W and iron-core loss 189.4 W — total roughly 458 W dissipated as heat. That heat stays inside the enclosure; IP00 means no housing, so the choke must be mounted in a clean, dry, ventilated cabinet (or a dedicated electrical room). Class H insulation (180 °C thermal class per IEC 60085) gives a generous temperature margin for high-ambient or overload conditions.

The choke measures 0.35 m wide × 0.321 m tall × 0.237 m deep — a substantial block, not a DIN-rail component. Main circuit connections are flat-type terminals (bus-bar or cable-lug interface), typical for high-current line reactors. Plan for rigid bus work or large-gauge cable lugs; the terminals expect a bolted connection, not a spring clamp.

The lifecycle stage is recorded as mature — meaning it's an established, stable design with no active phase-out notice. It carries UL/CSA recognition per EN 61558, so it's accepted for North American panels that require listed components. The IP00 protection class means no ingress protection; install in a cabinet that keeps out dust and moisture.

MPN
4EU3622-0EC00-1BA0