Skip to main content
Siemens 5SU1324-7FA40

Siemens SENTRON 5SU1324-7FA40 RCBO, 2P, C-curve, 40 A, 10 kA

MPN 5SU1324-7FA40
Active

Siemens SENTRON 5SU1324-7FA40 RCBO, 2-pole instantaneous, C-curve, 40 A at 30 °C, 10 kA (EN 60898) / 15 kA (IEC 60947-2), 230/240 V AC, 50 Hz, IP20, halogen-free.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1324-7FA40 specifications
ParameterValue
Poles2
Depth77 mm
Width54 mm
Height90 mm
Energy limitation class3

Product details

Rated parameters and breaking capacity

Rated at 40 A at 30 °C with a rated voltage of 230/240 V AC at 50 Hz, it provides overcurrent and earth-fault protection in a single module. The breaking capacity is 10 kA per EN 60898 and 15 kA per IEC 60947-2 — the higher IEC figure matters when the device is installed in an industrial distribution board where fault levels may exceed the domestic 10 kA threshold. Supply can enter from either top or bottom, and the mounting position is unrestricted. IP20 applies only when the distribution board is installed with conductors connected.

Thermal derating and environmental range

Rated current is 40 A at 30 °C, derating to 29.2 A at 70 °C. The full derating curve is documented: 37.6 A at 40 °C, 36.4 A at 45 °C, 34.8 A at 50 °C, 32.4 A at 55 °C and 60 °C, and 30.8 A at 65 °C. For a panel that sees elevated internal temperatures — typical in a crowded enclosure or near a heat source — use the 40 °C or 50 °C column to size the circuit, not the 30 °C headline figure.

Insulation voltage (Ui) is 264 V, surge voltage resistance is 4 000 V. The minimum test voltage is 195 V.

MPN
5SU1324-7FA40