Skip to main content
Siemens 6EP1332-2BA20

Siemens 6EP1332-2BA20 Power Supply, 2.5 A, 120/230 V AC

MPN 6EP1332-2BA20
Active

Siemens SITOP PSU100C 6EP1332-2BA20, 2.5 A rated output, 120/230 V AC input, DIN rail mount, IP20.

$76.20 – $194.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP1332-2BA20 specifications
ParameterValue
Fuse protection typeT 3,15 A/250 V (not accessible)
Voltage24 V
Power60 W
Frequency47 ... 63 Hz
Phases1-phase
IP ratingIP20
MountingSnaps onto DIN rail EN 60715 35x7.5/15
Depth120 mm
Width32.5 mm
Height125 mm
Efficiency85%

Product details

The Siemens 6EP1332-2BA20 is a SITOP PSU100C power supply delivering a rated output of 2.5 A at 24 V DC, with automatic range selection on the AC input side covering 85–132 V and 170–264 V at 47–63 Hz. The output is safety extra-low voltage (SELV) per EN 60950-1 and EN 50178, so it can directly power PLCs, sensors, and 24 V DC control circuits without additional isolation.

The rated current of 2.5 A holds up to +45 °C ambient; above that, derate 3 % per K up to +70 °C. At 40 °C the MTBF is over 1.8 million hours, which translates to low expected failure rates in continuous-duty applications like conveyor controls or pump stations. The recommended upstream protection is a miniature circuit breaker rated 3 A, characteristic C. The internal fuse is a T 3.15 A / 250 V type, not user-accessible, so the MCB is your primary overcurrent device. Input inrush is limited to 3.5 A maximum, typically 0.4 A, which avoids nuisance tripping of the feeder breaker during power-up.

This unit carries cULus listing under UL 508 and CSA C22.2 No. 107.1 (File E197259), plus cCSAus to CSA C22.2 No. 60950-1 and UL 60950-1. CE and EAC marks are present. It is not ATEX or IECEx rated, and not NEC Class 2. DNV GL marine approval is confirmed, so it suits shipboard or offshore installations where classification society certification is required.

MPN
6EP1332-2BA20