Skip to main content
Siemens 6ES7132-7GD10-0AB0

Siemens 6ES7132-7GD10-0AB0 ET200iSP 4 DQ, 27 mA, Ex ib

MPN 6ES7132-7GD10-0AB0
Active

Siemens SIMATIC DP ET200iSP electronic module, 6ES7132-7GD10-0AB0, 4 digital outputs, 17.4 V DC / 27 mA, Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb.

$331.47 – $678.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7132-7GD10-0AB0 specifications
ParameterValue
Depth136.5 mm
Width30 mm
Height129 mm

Product details

Ex-rated output module for ET200iSP

The Siemens 6ES7132-7GD10-0AB0 is a 4-channel digital output module for the ET200iSP distributed I/O system, carrying Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, and Ex ib [ia] I Mb certifications. Each transistor output switches 27 mA at 17.4 V DC nominal, with a 150 Ω internal resistor limiting fault current; connecting outputs in parallel doubles the current capacity to 54 mA.

Supply voltage and diagnostics

The module draws 260 mA from the 13.3 V DC load voltage L+ (plus up to 300 mA for the actuator supply) and 10 mA from the 3.3 V DC backplane bus — the supply voltage is 13.3 V DC, not the usual 24 V DC, so confirm the ET200iSP power supply matches this. Diagnostics include a parameterizable group error SF (red) LED, per-channel green status indicators, and readable diagnostic information covering wire-break (detected when R > 10 kΩ and I < 100 µA) and short-circuit (detected when R < 800 Ω on a single output, or R < 40 Ω with parallel outputs). Channel-to-channel isolation is not provided, but the channels are isolated from the backplane bus and from load voltage L+ — important to note when sharing field wiring across channels.

Switching performance and cable length

Resistive load switching is rated at 100 Hz max; inductive loads drop to 2 Hz max due to the energy-limited intrinsically-safe output circuit. Both shielded and unshielded cable runs are supported up to 500 m, giving flexibility in field wiring layout across a process plant.

MPN
6ES7132-7GD10-0AB0