Skip to main content
ABB S202MUC-K3

ABB S202MUC-K3 S200MUC MCB, 2P K 3A, 277VAC/500VDC

MPN S202MUC-K3

ABB S200MUC series, S202MUC-K3, 2-pole miniature circuit breaker, Trip Curve K, 3 A, 277 VAC / 500 VDC, 6 kA interrupting rating, DIN rail mount.

$224.33 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

S202MUC-K3 specifications
ParameterValue
Product typeTrip Curve K
Voltage500 V
Current3 A
Breaking capacity6 kA
Poles2
MountingDIN Rail

Product details

The 277 VAC / 500 VDC voltage rating covers common single-phase line-to-neutral (277/480Y) and DC control bus applications.

The 2-pole width (2 modules, 36 mm) fits a standard distribution board or sub-panel. Terminal design accepts up to 25 mm² conductor — common for the 3 A branch feed. No special air-gap or segregation required for this interrupting rating in a typical IP2X enclosure.

The closest functional peer is the S202M-C10 — same 2-pole DIN-rail footprint, same 277 VAC / 6 kA interrupting rating. The difference is trip curve and amp rating: the S202MUC-K3 uses Curve K (8–12× In, 3 A) for inductive loads, while the S202M-C10 uses Curve C (5–10× In, 10 A) for general-purpose or resistive loads. The S202MUC-K3 also carries a higher DC voltage rating (500 VDC vs 125 VDC) and 10 kA DC interrupting capacity — so it handles DC control circuits the C10 cannot. If the panel was specified around the S202M-C10, swapping to the S202MUC-K3 requires verifying the load current (3 A vs 10 A) and confirming the trip curve matches the load type. The physical mounting is identical — no rewiring needed for the DIN-rail footprint.

MPN
S202MUC-K3