Skip to main content
Siemens 3RK1301-0KB00-1AA2

Siemens 3RK1301-0KB00-1AA2 SIMATIC Motor Starter, Reversing,

MPN 3RK1301-0KB00-1AA2

Siemens SIMATIC 3RK1301-0KB00-1AA2, reversing motor starter, Class 10, 50 kA SCCR at 400 V, PROFINET/PROFIBUS, 24 V DC, pluggable on terminal module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1301-0KB00-1AA2 specifications
ParameterValue
Mountingpluggable on terminal module
Depth120 mm
Width90 mm
Height265 mm
Trip classCLASS 10

Product details

What this reversing starter does — and what it doesn't

The 3RK1301-0KB00-1AA2 is a SIMATIC reversing motor starter — a single unit that handles forward and reverse direction control for a motor load, with integrated overload protection rated Class 10. It is not a direct-start device; the reversing function is built in, so the BOM line replaces what would otherwise be two contactors, a mechanical interlock, and a separate overload relay.

Fieldbus and I/O — what the control module brings

This starter supports both PROFINET and PROFIBUS DP protocols, so it drops into either a SIMATIC S7-1500 PROFINET ring or a legacy PROFIBUS DP segment without a gateway. The I/O mapping is 1 byte of inputs and 1 byte of outputs — enough for basic status and control signals (run forward, run reverse, fault reset, overload trip). Digital I/O are not on the base unit; they are added via a separate control module that plugs into the starter's top interface.

The starter mounts by plugging onto a terminal module — no DIN-rail clips, no screws into the panel base. Dimensions are 265 mm high, 90 mm wide, 120 mm deep. The width is the critical panel-spacing number: at 90 mm, it occupies roughly five 18 mm-wide DIN-rail terminal positions. Mounting can be vertical or horizontal, which gives flexibility in shallow enclosures.

The unit is rated for pollution degree 3 at 400 V and degree 2 at 500 V per IEC 60664 / IEC 61131 — meaning it tolerates conductive pollution (condensation, light dust) at 400 V but requires a cleaner environment at 500 V. Shock resistance is 5 g for 11 ms; vibration resistance is 2 g. Maximum switching frequency is 750 operations per hour. Power dissipation is 4.118 W without bypass, 4.1184 W with bypass — negligible for enclosure thermal calculations.

Supply voltage and control logic

The control supply is 24 V DC nominal, with a permissible range of 20.4 to 28.8 V DC. The unit does not include brake control for either 24 V DC or 180 V DC brakes — if the motor has a brake, it must be controlled externally. Reverse starting is supported; direct starting is not, which is consistent with the reversing-starter design.

MPN
3RK1301-0KB00-1AA2