Skip to main content
Siemens 3RW5056-2TB14

Siemens 3RW5056-2TB14 Soft Starter, 81 A, 200-480 V, ATEX

MPN 3RW5056-2TB14
Active

Siemens SIRIUS 3RW5056-2TB14 soft starter, 81 A minimum rated current, 200-480 V rated voltage, ATEX and IECEx certified, Trip Class 10A/10E/20E per IEC 60947-4-2, PROFIBUS and Modbus RTU/TCP.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5056-2TB14 specifications
ParameterValue
Mountingscrew fixing
Depth249 mm
Width120 mm
Height198 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

Motor starting profile and overload coordination

The 3RW5056-2TB14: Rated voltage 200-480 V and minimum settable current 81 A define the motor frame size this unit handles — match the FLA of the motor to the lower end of the adjustment range for proper protection. Trip Class 10A / 10E (preset) / 20E per IEC 60947-4-2 gives three overload protection profiles: Class 10A for standard starts, Class 10E for electronic overload matching, and Class 20E for high-inertia loads that need longer acceleration time before tripping. Minimum load of 15% relative to the smallest settable Ie means the soft starter can handle lightly loaded motors without nuisance tripping on undercurrent — useful for centrifugal pumps or fans that start unloaded.

ATEX and IECEx — what they mean for hazardous-area installations

ATEX and IECEx certification (both marked Yes) means this soft starter carries the paperwork for installation in explosive atmospheres per the ATEX directive 2014/34/EU and IECEx scheme — essential for oil & gas, chemical, or grain-handling lines where motor starting occurs in a classified zone. The unit still requires an upstream motor protection device (circuit breaker or fuses) coordinated with the soft starter's overload curve to maintain the Ex protection concept — the soft starter alone is not the sole protective device in the hazardous circuit.

Fieldbus integration — which networks it talks to natively

Native PROFIBUS DP, Modbus RTU, Modbus TCP, and EtherNet/IP support means this unit drops into most plant-floor networks without a separate gateway module — the commissioning engineer sets the node address and baud rate during startup. PROFIenergy function is available but requires the PROFINET standard communication module as a special accessory — budget for that if the site uses PROFINET and needs energy management data from the soft starter. Error logbook is present but only in conjunction with special accessories — the base unit does not store fault history onboard; plan for an external logging device if fault recording is needed for diagnostics.

No stock-holding claim — confirm lead time for your lot size before committing the production schedule. Regulatory approvals CE, UL, and CSA cover North American and European installations — no additional certification steps needed for most standard industrial panels shipping to these regions.

Panel layout and mounting clearances

Dimensions 249 mm depth, 120 mm width, 198 mm height — the width fits a standard 120 mm DIN-rail footprint, but note the depth requires 249 mm of enclosure depth clearance for the heat sink and wiring space behind the unit. Mounting position allows vertical surface mounting with ±90° rotation and ±22.5° tilt forward/backward — useful for tight enclosures or angled back panels, but derating above 40°C ambient must be observed per the operating temperature range of -25 to +60°C. Required clearances: 100 mm upwards, 10 mm forwards, 0 mm backwards, 75 mm downwards, 5 mm at the side — the zero backward clearance means the unit can sit flush against the back panel, but the 75 mm downward gap is mandatory for heat dissipation from the power section.

MPN
3RW5056-2TB14