Skip to main content
Siemens 4EU3632-0MH08-4BA0

Siemens SIDAC 4EU3632-0MH08-4BA0 Output Reactor, 110A, 4000H

MPN 4EU3632-0MH08-4BA0

Siemens SIDAC output reactor, 3-phase AC, 110A max, 4000Hz rated frequency, 0.6mH, IP00, class H insulation, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU3632-0MH08-4BA0 specifications
ParameterValue
IP ratingIP00
Depth0.22 m
Width0.35 m
Height0.32 m

Product details

What this output reactor does on a drive line

The Siemens SIDAC 4EU3632-0MH08-4BA0 is a 3-phase AC output reactor rated for 110 A maximum continuous current and a rated frequency of 4000 Hz, with an inductance of 0.0006 H (0.6 mH). It sits between the drive output and the motor cable to limit the rate of voltage rise (dV/dt) and reduce capacitive charging currents in long cable runs, protecting the motor insulation from reflected-wave damage.

The 110 A maximum rating (Ithmax) governs the continuous current the reactor can carry without exceeding its thermal limits. The 4000 Hz rated frequency matches the switching frequency of modern IGBT-based drives — a reactor rated for 4 kHz carrier frequency will handle the harmonics without saturating the core. The 0.6 mH inductance value determines the impedance at the switching frequency and thus the dV/dt suppression; a lower inductance gives less filtering, a higher one more voltage drop at the motor terminals. The 299 W copper loss and 241 W iron loss together total about 540 W of heat that must be dissipated inside the panel — factor that into your enclosure cooling calculation.

The reactor measures 0.35 m wide by 0.32 m tall by 0.22 m deep — a substantial footprint that requires a dedicated mounting plate or DIN-rail adapter (not included). The main current connections use flat-type terminals, which accept busbar or cable lugs; plan for a torque wrench and the correct lug width. The thermal class H insulation means the winding can sustain a 180 °C hot-spot temperature without degradation, so it can be mounted near other heat-generating components as long as the ambient stays at or below the rated 40 °C.

MPN
4EU3632-0MH08-4BA0