Skip to main content
Siemens 6ES7134-4GD00-0AB0

Siemens 6ES7134-4GD00-0AB0 Analog Input Module, 4 x 4-20 mA

MPN 6ES7134-4GD00-0AB0

Siemens ET 200S analog input module, 6ES7134-4GD00-0AB0, 4 inputs, 4-20 mA, 13-bit, 24 VDC from backplane, 15 x 81 x 52 mm.

$261.78 – $462.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7134-4GD00-0AB0 specifications
ParameterValue
Depth52 mm
Width15 mm
Height81 mm
Measurement principleIntegrating

Product details

Four 4-20 mA channels, sealed for the panel

The Siemens 6ES7134-4GD00-0AB0 is an ET 200S analog input module with four 4-20 mA inputs, each pulling into a 25 Ohm burden. It draws its 24 VDC from the power module on the rail — no separate loop supply needed unless the transmitter requires more than the module's internal supply can source. Resolution is 13 bits including sign over the 4-20 mA range, with a maximum cycle time of 40 ms across all channels. Integration time is parameterizable at 16.67 or 20 ms, matching 50/60 Hz line rejection.

The 15 mm wide housing clips onto the ET 200S DIN-rail assembly, and the 52 mm depth keeps it inside the standard enclosure footprint. At 40 g and 0.6 W typical power loss, it adds negligible thermal load to a crowded panel. Short-circuit proof at roughly 200 mA per module — if a loop shorts, the module limits current rather than blowing a fuse. Wire-break detection is active only in the 1 to 5 V measuring range, not on the 4-20 mA range, so a broken loop on a 4-20 mA transmitter will read 0 mA without a diagnostic flag unless you configure the range accordingly. The module supplies voltage for 2-wire transmitters through the input terminals, which simplifies wiring — no external loop power supply needed for each channel. Isolation is tested at 500 VDC between channels and the backplane bus, but there is no isolation between channels and load voltage L+.

MPN
6ES7134-4GD00-0AB0