Skip to main content
Siemens 6ES7134-4NB01-0AB0

Siemens 6ES7134-4NB01-0AB0 ET200S 2-Channel Thermocouple

MPN 6ES7134-4NB01-0AB0

Siemens ET200S 2-channel analog input module, 6ES7134-4NB01-0AB0, for thermocouple types B, C, E, J, K, L, N, R, S, T, 15 x 81 x 52 mm, powered from backplane.

$248.00 – $683.95 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7134-4NB01-0AB0 specifications
ParameterValue
Temp operating max24 °C
Temp operating min15 °C
Depth52 mm
Width15 mm
Height81 mm
Measurement principleIntegrating
Conversion time per channel66 ms; 66 / 80 ms; additional conversion time for diagnostic wire break test
Internal temperature compensationYes; possible with TM-E15S24-AT, TM-E15C24-AT

Product details

Panel fit and backplane integration

The 6ES7134-4NB01-0AB0 is a 15 mm wide ET200S electronic module that snaps onto the DIN rail and draws its 24 VDC operating power from the power module via the backplane bus — no separate field supply wiring needed for the module itself. At 52 mm depth and 81 mm height, it occupies the same envelope as other ET200S analog modules, so a populated rail with mixed digital and analog slices keeps a uniform front face for cable duct routing.

Thermocouple input range and filtering

Two differential thermocouple inputs accept types B, C, E, J, K, L, N, R, S, and T per IEC 584, with an input resistance of 1 MΩ across all supported types — high enough to avoid loading the thermocouple signal even on long shielded runs up to 50 m. The integrating measurement principle uses a 16.7 or 20 ms integration time (selectable), and the digital filter can be set in four stages — none (1× cycle time), low (4×), medium (32×), or high (64×) — to trade noise rejection against response speed. Wire-break detection is available for thermocouple inputs only, and can be enabled or disabled per channel; a group error LED (SF red) signals any fault condition, with group diagnostics also configurable on/off.

Typical power dissipation is 0.6 W, and the module is isolation-tested at 500 V DC between channels and the backplane.

MPN
6ES7134-4NB01-0AB0