Skip to main content
Siemens 6ES7136-6BA01-0CA0

Siemens 6ES7136-6BA01-0CA0 ET 200SP F-DI 8×24V, SIL 3

MPN 6ES7136-6BA01-0CA0
Active

Siemens ET 200SP fail-safe digital input module, 6ES7136-6BA01-0CA0, 8 inputs, 24 V DC, SIL 3, 15 mm width, current production.

$149.86 – $443.85 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7136-6BA01-0CA0 specifications
ParameterValue
Depth58 mm
Width15 mm
Height73 mm
I/O channels8
Source sink inputP-reading, Yes

Product details

Safety-rated input slice for ET 200SP

This 6ES7136-6BA01-0CA0 is an ET 200SP fail-safe digital input module (F-DI 8×24V) rated SIL 3 per IEC 61508, meaning it can be used in safety functions up to that integrity level — emergency stops, light curtain monitoring, or two-hand control circuits where the machine must detect a fault within the safety reaction time. It takes 8 digital inputs at 24 V DC nominal, with a signal "1" threshold of +15 to +30 V and a signal "0" range of -30 to +5 V, so it works with standard 24 V sensors and NPN/PNP field devices as long as the common reference is set correctly.

Signal timing and diagnostic coverage

Input filtering is parameterizable between 0.4 ms and 20 ms for both rising and falling edges — the 0.4 ms minimum lets you catch fast sensor pulses (e.g., from a proximity switch on a high-speed indexing conveyor), while the 20 ms maximum debounces mechanical contacts without a separate filter block. Diagnostic coverage includes a per-channel status LED (green), a module diagnostics LED (green/red DIAG), and a red channel-error LED — the diagnostic alarm reports wire-break or short-circuit to the safety CPU, which can trigger a safe state without polling each input. Galvanic isolation is tested at 707 V DC type test between channels and the backplane bus, so a fault on one field circuit won't propagate to the rest of the rack.

Shielded cable runs up to 1000 m are allowed; unshielded up to 500 m, so you can place the module near the field devices in a local cabinet rather than pulling long sensor cables back to the main panel. The 24 V DC supply draws 40 mA without load and the module dissipates 2 W typical, so the station power budget needs to account for this slice plus the BaseUnit's own consumption.

I&M data (I&M0 to I&M3) is supported, so the module identifies itself to TIA Portal and the HMI for asset tracking without manual label checks.

MPN
6ES7136-6BA01-0CA0