Skip to main content
Siemens 6ES7151-3AA23-0AB0

Siemens 6ES7151-3AA23-0AB0 IM 151-3 PN ST, 2-Port PROFINET

MPN 6ES7151-3AA23-0AB0

Siemens 6ES7151-3AA23-0AB0, SIMATIC DP interface module IM 151-3 PN ST for ET 200S, 2-port PROFINET, 100 Mbit/s, ARP, IRT, MRP.

$349.89 – $1,000.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7151-3AA23-0AB0 specifications
ParameterValue
Depth75 mm
Width60 mm
Height119.5 mm

Product details

The Siemens 6ES7151-3AA23-0AB0 is an IM 151-3 PN ST interface module for the ET 200S distributed I/O system. It serves as the PROFINET gateway, linking up to 63 electronic, power, or motor starter modules (total width up to 2 m) to a higher-level controller via two RJ45 ports at 100 Mbit/s.

Two RJ45 ports enable line or ring topology; with MRP you get media redundancy failover within milliseconds. For time-synchronized application – like coordinated drive motion – IRT delivers deterministic cycle times. ARP handles automatic replacement of a failed module without project engineering: swap the hardware, the IO controller picks up the new device. Data volume caps at 256 bytes input and 256 bytes output. Power consumption is 3.3 W typical. The module holds its power-up state for 20 ms after a mains dip – long enough to ride through short grid glitches without a processor restart. Dimensions are 60 x 119.5 x 75 mm, occupying a single ET 200S base unit slot.

What this module is NOT

This module is an interface for ET 200S, not a programmable controller. It operates from 0 °C to 60 °C.

UL approval and CE mark are noted in the spec.

MPN
6ES7151-3AA23-0AB0