Skip to main content
Siemens 6ES7532-5HD00-0AB0

Siemens 6ES7532-5HD00-0AB0 Analog Output Module, MSO, SIL 2

MPN 6ES7532-5HD00-0AB0
Active

Siemens SIMATIC S7-1500 analog output module, 6ES7532-5HD00-0AB0, MSO support, SIL 2, 35 mm wide, 129 mm depth, 24 V DC, 4 W typ.

$368.30 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7532-5HD00-0AB0 specifications
ParameterValue
Depth129 mm
Width35 mm
Height147 mm
Conversion time per channel0.5 ms

Product details

MSO and SIL 2 — two specs that decide the slot

The 6ES7532-5HD00-0AB0 supports MSO (Multiple Simultaneous Output), which means all eight analog output channels update their values on the same bus cycle — critical for coordinated motion or multi-loop process control where channel-to-channel skew breaks the application.

Output types, diagnostics, and cable run limits

The module covers voltage outputs (0–10 V, 1–5 V, –10 to +10 V) and current outputs (0–20 mA, 4–20 mA, –20 to +20 mA), with wire-break detection active only on current outputs and short-circuit detection only on voltage outputs. Maximum shielded cable length is 800 m for current outputs and 200 m for voltage — a real constraint when routing to a remote actuator cabinet; budget the shorter run if you mix output types on the same module. Diagnostic alarm, per-channel diagnostics, and a red ERROR LED are standard, so the module reports a blown fuse or a broken wire without polling each channel.

Lifecycle and firmware — what you need to order

Firmware version V2.2.0 is pre-loaded; field updates are possible via the TIA Portal, and the module carries I&M data (I&M0 through I&M3) for asset tracking and engineering consistency. Typical power loss is 4 W at 24 V DC — factor that into the backplane power budget, especially in a densely populated rack.

The module snaps onto the S7-1500 DIN rail with a 35 mm width and 129 mm depth, leaving 147 mm height clearance for the top cable duct. HW functional status from FS04 means the hardware revision is traceable for SIL validation documentation.

MPN
6ES7532-5HD00-0AB0