Skip to main content
Siemens 6GT2801-4BA10-0AX2

Siemens 6GT2801-4BA10-0AX2 SIMATIC RF350R Reader, 13.56 MHz,

MPN 6GT2801-4BA10-0AX2
Active

Siemens SIMATIC RF300, reader RF350R (GEN2), RS422 interface (3964R), without antenna, IP65, -25 to +70 °C, 75 x 75 x 41 mm, ATEX (Zone 3G/3D) and IECEx (Gc/Dc) for Zone 2/22.

$482.60 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2801-4BA10-0AX2 specifications
ParameterValue
IP ratingIP64
Mounting2 x M5 screws
Shock acceleration500 m/s²
ColorTi gray
Depth75 mm
Width75 mm
Height41 mm
MaterialPA 12

Product details

RFID reader for Zone 2/22 environments

The Siemens 6GT2801-4BA10-0AX2 is a SIMATIC RF300 RFID reader (RF350R GEN2) operating at 13.56 MHz with an RS422 interface using the 3964R protocol. It is designed for industrial identification in environments requiring ATEX Zone 3G/3D and IECEx Zone 2/22 certification, making it suitable for petrochemical and process areas where explosive atmospheres may be present. The IP64 enclosure means the reader body resists dust ingress and water splashes from any direction — adequate for washdown areas but not for continuous submersion. The housing is PA 12 (polyamide), silicon-free, and rated for a -25 to +70 °C operating range.

Read/write performance and antenna integration

Typical read and write access per byte is 0.13 ms, with a maximum transfer rate of 106 kbit/s over the air interface. The reader supports RF300-specific, ISO 15693, ISO 18000-3, and ISO 14443 protocols. It is not multitag-capable — each read cycle handles one transponder at a time. One external antenna connects via an M8, 4-pin connector; a fixed 3 m antenna cable is supplied. The RS422 communication interface uses an M12, 8-pin connector, with a maximum cable length of 1000 m. Mounting uses two M5 screws into the 75 x 75 x 41 mm footprint.

The reader is specified for use with RF300, ISO 15693, and MOBY E transponders.

MPN
6GT2801-4BA10-0AX2