The Omron E2E-X10B1DL30 2M is a shielded M30 threaded inductive proximity sensor from the E2E NEXT series, delivering a 10 mm sensing distance with a PNP normally-open output. It runs on 10–30 VDC and switches up to 200 mA — a standard industrial interface for any PLC digital input. Rated IP67 and IP69K, this sensor withstands high-pressure washdown environments — the usual requirement in food processing, wash stations, and outdoor conveyor lines. It also carries vibration and oil resistance, backed by UL 60947-5-2 and CSA/CE certifications, so you can commit it to a BOM that goes through regulatory review.
Wired Cable vs. M12 Connector: Choosing the Right Variant
This exact order code comes with a 2 m prewired cable terminating in bare wires. The sister part E2E-X10B1DL30-M1 has identical electrical ratings — same shielded M30 barrel, PNP NO output, 10 mm range, IP69K — but terminates in an M12 connector instead of a cable. If your panel is already wired with flying leads and terminal blocks, the 2 m cable version drops in with three splices. If you’re building a quick-disconnect network or need to replace a sensor without rewiring the backplane, the M12 version saves that downtime. Both carry the same CE/CSA/UL 60947-5-2 declarations, so compliance documentation is the same.
Active Production and Compliance Documentation
Compliance is fully documented: the sensor is certified to UL 60947-5-2 (editions 4 and 14), CSA C22.2, and CE. These marks cover the functional safety, electrical, and environmental requirements for most industrial machinery imports. If your quality gate demands a declaration of conformity, the applicable standards are in the record.
Mounting and Environment Considerations
Because it is shielded, this sensor can be flush-mounted in metal without derating the 10 mm detection range. The M30 nickel-plated brass barrel requires a standard 30 mm hole; overall height is 82 mm from the face to the cable exit. Operating temperature spans –40 °F to +185 °F. The prewired cable is oil-resistant.