Integrator’s Spec Recap
The E2E-X10B1DL30-M1 is an M30 shielded inductive proximity sensor from the E2E NEXT series, sensing distance rated at 10 mm with a PNP normally open output. It operates on 10-30 VDC and sinks up to 200 mA. The housing is nickel-plated brass with an M12 quick-connect, rated IP67 and IP69K for washdown environments. It carries UL 60947-5-2, CSA C22.2, and CE compliance.
Lifecycle and Compliance Documentation
The lifecycle stage is current production, so there is no imminent obsolescence risk for BOM planning. The sensor is certified to UL 60947-5-2 (edition 4 and amendment 14) and CSA C22.2, with CE marking. A declaration of conformity covering these standards is available upon request. The IP67 and IP69K ratings are confirmed against the applicable testing protocols, making it suitable for high-pressure washdown environments.
Mounting and Wiring Note
Supplied with clamping nuts and a toothed washer, the shielded sensing face allows flush mounting without derating the 10 mm range. M12 connector accepts 3-wire PNP cordsets; load current max 200 mA, supply 10-30 VDC, with indicator light for target presence.