Omron E2E NEXT, M12 inductive proximity sensor, unshielded, 10 mm range, DC 2-wire NO, 0.3 m PVC cable with M12 Smartclick connector.
| Parameter | Value |
|---|---|
| Sensing distance | 10 mm range |
| Shielding | Unshielded |
| Parameter | Value |
|---|---|
| Operation mode | Normally open |
| Parameter | Value |
|---|---|
| Cable length | 0.3 meter cable |
| Parameter | Value |
|---|---|
| Weight | 0.45 kgs |
| Polarity | Polarity |
| Cable type | PVC cable |
| Body length | Standard length |
| Body diameter | M12 size |
| Connection method | M12 pre-wired Smartclick |
| Output configuration | DC 2-wire |
The Omron E2E-X10MD112-M1TGJ 0.3M is an inductive proximity sensor from the E2E NEXT series. It uses an M12 unshielded body to detect ferrous metal targets up to 10 mm away. Wiring is straightforward: DC 2-wire, normally open output. The 0.3 m PVC pigtail ends in an M12 Smartclick connector, so you can swap the sensor without re-running cable from the panel.
No. The E2KQ-X10ME1 is a capacitive sensor with NPN 3-wire output, whereas the E2E-X10MD112-M1TGJ 0.3M is an inductive sensor with DC 2-wire output. They sense different target materials and require different wiring.
No related articles