The E2E-X15B3D30-M1TJ 0.3M is an M30 shielded PNP proximity sensor from the E2E NEXT series. It carries IP69K alongside IP67G and IP67, so it survives daily CIP washdown cycles without sealing degradation. The short body (60.3 mm overall) with a 0.3 m M12 Smartclick pigtail allows quick replacement in tight hygienic zones. Rated sensing distance is 15 mm with a 2x sensing range factor. The shielded construction permits flush mounting in stainless steel panels—no dead zone around the sensor face, which aligns with clean-in-place requirements.
Sibling comparison – E2E-X22B3T30-M1TJR 0.3M
The closest same-frame sibling is the E2E-X22B3T30-M1TJR 0.3M. Both are M30 shielded, PNP, 3-wire DC, with identical materials (nickel-plated brass, PBT sensing face) and the same overall length. The 22 mm variant offers a 22 mm sensing distance at 3x range and IO-Link COM3 instead of COM2. Its cable is a robot-grade bend-resistant M12 pigtail. 15 mm sensing distance on this unit; 22 mm on the sibling. COM2 versus COM3 on the IO-Link master—confirm protocol support before swapping.