The Omron E2E-X1R5D2-T-N 5M is a shielded M8 short-body inductive proximity sensor from the E2E NEXT DC 2-wire series, rated for a 1.5 mm sensing range with NC output. The stainless steel (SUS303) housing and IP67, IP67G, and IP69K sealing let it survive direct washdown in food, beverage, or pharmaceutical lines, where standard sensors fail from ingress. Its short-body M8 footprint fits the tight clearances on packaging machines, pick-and-place grippers, and conveyor diverters — anywhere a 1.5 mm gap to a ferrous target is available.
IP rating and environmental reach
Triple-rated IP67, IP67G, and IP69K — the G adds oil resistance, and IP69K withstands high-pressure washdown. The PBT sensing face maintains chemical resistance to common cleaning agents found in CIP (clean-in-place) cycles.
Wiring and electrical constraints
Operates on a 2-wire DC supply spanning 10–30 VDC. NC (normally-closed) output simplifies fail-safe circuits: a broken wire or sensor loss opens the loop, consistent with guard-monitoring logic. The 5 m PVC cable is factory-attached — no field wiring or connector to get knocked loose. Shielded construction prevents false triggers near VFD cables or motor leads.
No direct replacement announced for this order code. If a different sensing distance or output logic is needed, the E2E NEXT family covers the same M8 shielded footprint — confirm wiring before substituting.