Skip to main content
Fuji Electric FRN0115G2S-2GU

Fuji FRN0115G2S-2GU FRENIC-Eco VFD, 40 hp, 114 A

MPN FRN0115G2S-2GU

Fuji Electric FRENIC-Eco series, FRN0115G2S-2GU, 40 hp variable frequency drive, 114 A output, 208V AC three-phase input, NEMA 1 enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FRN0115G2S-2GU specifications
ParameterValue
SeriesFRENIC - Eco
Input typeAnalog; Digital
Output signalAnalog; Digital
Control typeKeypad, Remote
Display typeLCD/LED
Voltage230 V AC
Input voltage208 V AC
Input voltage range200 V-240 V AC +10% / -15%
IP ratingNEMA 1
ColorBlue
ApplicationHV AC
I/O channels(7) Digital; (3) Analog
Control methodVariable Frequency Control

Product details

The Fuji FRN0115G2S-2GU is a 40 hp variable frequency drive from the FRENIC-Eco series, sized for a 114 A maximum output current at 230V AC three-phase output. It accepts 208V AC three-phase input (200-240V AC +10%/-15% range) at 50/60 Hz. The 114 A rating is the continuous output current — that's the number to match against your motor's full-load amps, not the 40 hp figure, since motor efficiency and service factor vary. Output frequency spans 0.1 to 120 Hz, covering most induction motor speed ranges for fans, pumps, and conveyors. This is a no-bypass, open-enclosure drive rated NEMA 1 (indoor use, drip-proof). It includes a built-in dynamic braking transistor — no external brake chopper needed — which matters for vertical loads or quick deceleration profiles on conveyors. The 50% starting torque at 1 Hz (variable torque application) means it handles centrifugal loads like fans and pumps cleanly without oversizing.

I/O and control summary

Control is via keypad or remote contacts. The drive accepts 7 digital and 3 analog inputs, and provides 5 digital and 2 analog outputs. The LCD/LED display shows motor speed (with percent), output frequency, output current, output voltage, alarm codes, and function codes. Start/stop is programmable; the digital readout covers the three key running parameters you'd monitor during commissioning.

Physical integration

Physical footprint: 21-3/4 inches high, 12-5/8 inches wide, 10 inches deep. Blue enclosure, open style with a heat sink. The NEMA 1 rating means it's intended for indoor panel mounting where dripping water or incidental contact is a concern, but it's not sealed against hose-down or outdoor exposure. No Ethernet port on this variant — control is via hardwired I/O or remote contacts.

MPN
FRN0115G2S-2GU