Skip to main content
Siemens 4EU2722-0AN00-4BA0

Siemens 4EU2722-0AN00-4BA0 Commutating Choke, 95A Rated, 400

MPN 4EU2722-0AN00-4BA0

Siemens 4EU2722-0AN00-4BA0 commutating choke for converter duty, 3-phase, 400V AC, 95A rated current (105A max), 0.2 mH, IP00, thermal class H.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU2722-0AN00-4BA0 specifications
ParameterValue
IP ratingIP00
Depth0.187 m
Width0.27 m
Height0.248 m

Product details

The Siemens 4EU2722-0AN00-4BA0 is a 3-phase commutating choke for converter input. It operates at 400 V AC, 95 A rated current, 105 A maximum. A 2.86% drop is a standard value for a line reactor — it provides meaningful harmonic attenuation without dropping so much voltage that the drive's DC bus undervoltages under load.

Where it fits — panel and thermal considerations

This is an open-frame (IP00) component. Dimensions are 0.27 m wide, 0.248 m high, 0.187 m deep. Thermal class H insulation per IEC 60085 means the winding can withstand a 180 °C hot-spot temperature. The total power loss is the sum of the coil loss (169 W) and the iron-core loss (99 W), so 268 W must be dissipated inside the panel. That is a significant heat load — forced ventilation or a properly sized cabinet is required to keep the ambient temperature at or below the 40 °C rating. The main circuit connection is via free cable endings, so the installer provides the ring terminals or ferrules. This is typical for a choke of this class — no pre-made connector, just stripped and tinned leads that land on a terminal block or the converter's input terminals.

MPN
4EU2722-0AN00-4BA0