Skip to main content
Siemens 6ES7154-4AB10-0AB0

Siemens 6ES7154-4AB10-0AB0 PROFINET IM 154-4 PN, IP65/67

MPN 6ES7154-4AB10-0AB0
Active

Siemens SIMATIC DP PROFINET Interface Module IM 154-4 PN High Feature for ET 200 PRO, IP65/67, 24 V DC, 100 Mbit/s.

$243.80 – $710.55 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7154-4AB10-0AB0 specifications
ParameterValue
IP ratingIP65
Depth60 mm
Width135 mm
Height130 mm

Product details

PROFINET IO Interface for ET 200 PRO

The 6ES7154-4AB10-0AB0: Diagnostic and hardware interrupts are parameterizable, allowing the safety loop to be tuned to specific failure modes — a requirement when the module is integrated into a functional safety architecture where fault reaction must be deterministic.

Harsh-Environment Build and Mounting

Housing is 135 mm wide, 130 mm high, 60 mm deep, approx. 490 g. Hot swapping of modules possible. Supply voltage is 24 V DC with reverse polarity protection against destruction and short-circuit protection via an exchangeable fuse in the lower part. Power loss is 6 W typical, dependent on terminal module and load conditions.

Diagnostics and Fault Indication

Six LEDs provide on-device status: LINK, MAINT, RX/TX, bus fault (BF red), group error SF (red), and 24 V supply monitoring (green). The bus fault and group error LEDs directly indicate network or module health for fast fault isolation at the cabinet. Isolation between supply voltage and electronics is tested at 707 V DC (type test), confirming dielectric strength for galvanic separation. SNMP and ping support enable integration into managed network monitoring.

MPN
6ES7154-4AB10-0AB0