Skip to main content
Siemens 5SU1356-7KK32

Siemens 5SU1356-7KK32 SENTRON RCBO, 32A C-curve, 6kA

MPN 5SU1356-7KK32
Active

Siemens SENTRON 5SU1356-7KK32 RCBO, 1P+N, 32 A rated at 30 °C, C-curve, 6 kA per EN 60898, 15 kA per IEC 60947-2, 230/240 V AC, 50 Hz, 2 MW, IP20.

$40.64 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1356-7KK32 specifications
ParameterValue
Poles2
Depth77 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

It protects a single-phase final subcircuit against earth leakage and overload/short-circuit in one unit, saving a DIN-rail slot over separate RCD and MCB. The C-curve tripping characteristic means it holds up to 5–10× rated current momentarily, so it's sized for motor or lighting loads with moderate inrush; a B-curve would trip faster on those starts. Rated 32 A at 30 °C, it derates to 24.64 A at 70 °C — the 30 °C figure is the one to use for most panel environments unless the enclosure runs hot.

The 6 kA rating is the minimum for residential/commercial panels. For selectivity coordination upstream, the energy limitation class 3 means it lets through less let-through energy (I²t) than class 1 or 2, which helps the upstream breaker stay selective and not trip on a downstream fault.

Depth is 77 mm, installation depth 70 mm — the extra 7 mm is the front projection of the toggle and test button. Supply can come from either top or bottom, which simplifies busbar routing in a crowded enclosure. The IP20 rating applies only when the distribution board is installed and conductors are connected — bare terminals are finger-safe but not splash-proof.

MPN
5SU1356-7KK32