Skip to main content
Siemens 6ES7332-7ND02-0AB0

Siemens 6ES7332-7ND02-0AB0 Analog Output Module, 4 AO

MPN 6ES7332-7ND02-0AB0
End of Life

Siemens S7-300 SM 332, 4-channel analog output module, 16-bit resolution, voltage and current outputs, EOL hot status.

$577.85 – $1,170.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7332-7ND02-0AB0 specifications
ParameterValue
Depth117 mm
Width40 mm
Height125 mm
Conversion time per channel200 µs; in isochronous mode 640 µs

Product details

The Siemens 6ES7332-7ND02-0AB0 is a 4-channel analog output module for the S7-300 family. It accepts four independent outputs configurable for voltage (0 to 10 V, 1 V to 5 V, -10 V to +10 V) or current (0 to 20 mA, 4 mA to 20 mA, -20 mA to +20 mA) with 16-bit resolution including overrange. This module runs on a 24 V DC load supply and draws up to 290 mA from L+ plus 120 mA from the backplane bus at 5 V DC. Typical power loss is 3 W.

For a BOM that requires a drop-in replacement, an integrator should verify the exact functional requirements and available siblings in the SM 332 family.

The module delivers 4 analog outputs in isochronous mode — each channel can be assigned its own output range. Conversion time is 200 µs per channel in standard mode, or 640 µs per channel in isochronous mode. Resolution runs to 16 bits including sign bit, which gives fine granularity across the full output span. Voltage outputs are short-circuit-protected with a maximum short-circuit current of 40 mA; current outputs can drive up to 500 Ω on the loop, with inductive loads up to 1 mH. Load response times vary: 0.2 ms for resistive loads, 0.5 ms for inductive loads, 3.3 ms for capacitive loads. The module includes parameterisable diagnostic alarm and group error indication (red SF LED). Channel-to-channel isolation and isolation to the backplane bus are both present, tested at 1 500 V DC. Reverse polarity protection is built in on the load supply.

Physical dimensions and connector

Maximum cable length for shielded twisted-pair runs is 200 m. The module mounts into the standard S7-300 DIN rail profile alongside other I/O and CPU modules.

MPN
6ES7332-7ND02-0AB0