Skip to main content
Log in
Schneider Electric A9T26606 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9T26606 Acti9 iDPN N VigiARC, 6 A C-curv

MPNA9T26606
Active

Schneider Electric Acti9 iDPN N VigiARC RCBO, 1P+N, 6 A, C-curve, 6 kA at 240 V AC, integrated earth-leakage protection, DIN rail mount.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9T26606 — Residual Current Protection
ParameterValue
Earth-leakage protection class / typeClass A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage dependent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip
A9T26606 — Electrical Ratings
ParameterValue
Rated current (In)6 A
Rated operational voltage (Ue)230/240 V AC 50 Hz conforming to AS/NZS 61009.1 230/240 V AC 50 Hz conforming to IEC 62606
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)250 V AC 50 Hz between phase and neutral 400 V AC 50 Hz between phases
Rated impulse withstand voltage (Uimp)4 kV conforming to AS/NZS 61009.1
Overvoltage categoryIII
Device location in systemOutgoer
Electrical durability20000 cycles 240 V AC 50 Hz conforming to AS/NZS 61009.1
Mechanical durability (operating cycles)20000 cycles
A9T26606 — Identification
ParameterValue
Product nameActi9 iDPN N VigiARC
Product / component typeArc fault detection RCBO
Product range / familyActi9
Device short nameiDPN N VigiARC
A9T26606 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal for 2 cable(s) 2.5 mm² rigid Tunnel type terminal for 1 cable(s) 16 mm² rigid Tunnel type terminal for 2 cable(s) 2.5 mm² flexible Tunnel type terminal for 1 cable(s) 10 mm² flexible
Wire stripping length14 mm
Terminal tightening torque2 N.m
Width36 mm
Height91 mm
Depth75 mm
A9T26606 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2 conforming to AS/NZS 61009.1 2 conforming to IEC 62606
Relative humidity95 % at 55 °C
Operating altitude2000 m
TropicalisationSeverity B conforming to IEC 60068-2-30 for 28 d
A9T26606 — Approvals
ParameterValue
StandardsEN/IEC 62606 AS/NZS 61009.1

Product details

It combines a 6 A thermal-magnetic MCB (C-curve, 5–10 x In magnetic trip) with integrated earth-leakage detection in a single 36 mm wide module that clips onto a DIN rail.

The 6 A rated current (In) and C-curve mean this RCBO is sized for lighting circuits, small appliance loads, or control transformers — not motor or high-inrush loads. The C-curve's 5–10 x In magnetic trip window (30–60 A instantaneous) avoids nuisance trips on moderate inrush but still clears a hard fault fast. The integrated earth-leakage protection (no separate RCCB) saves panel space and wiring time, but the neutral is fixed on the left — verify your busbar or feed arrangement before landing the module.

Cable entry from top or bottom. IP20 finger-safe front, pollution degree 2 — standard for enclosed distribution boards. Tropicalisation severity B (28-day damp heat per IEC 60068-2-30) means it holds up in high-humidity environments without derating.

Frequently asked questions

What is the breaking capacity of A9T26606?

The breaking capacity is 6000 A at 240 V AC, 50 Hz, conforming to AS/NZS 61009.1.

What standards does A9T26606 comply with?

It complies with EN/IEC 62606 and AS/NZS 61009.1, and carries the RCM quality label for Australia and New Zealand.

Where can I buy A9T26606 and how is it quoted?

The A9T26606 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
A9T26606