Schneider Electric Acti9 iDPN N VigiARC RCBO, 1P+N, 16 A, C-curve, 6 kA at 240 V AC, integrated earth-leakage protection, DIN rail mount.
| Parameter | Value |
|---|---|
| Earth-leakage protection class / type | Class A |
| Earth-leakage trip time delay | Instantaneous |
| Residual-current tripping technology | Voltage dependent |
| Trip unit technology | Thermal-magnetic |
| Local signalling / indication | ON, OFF, fault trip |
| Parameter | Value |
|---|---|
| Rated current (In) | 16 A |
| Rated operational voltage (Ue) | 230/240 V AC 50 Hz conforming to AS/NZS 61009.1 230/240 V AC 50 Hz conforming to IEC 62606 |
| Poles description | 1P + N |
| Neutral pole position | Left |
| Network type | AC |
| Network frequency | 50 Hz |
| Rated insulation voltage (Ui) | 250 V AC 50 Hz between phase and neutral 400 V AC 50 Hz between phases |
| Rated impulse withstand voltage (Uimp) | 4 kV conforming to AS/NZS 61009.1 |
| Overvoltage category | III |
| Device location in system | Outgoer |
| Electrical durability | 20000 cycles 240 V AC 50 Hz conforming to AS/NZS 61009.1 |
| Mechanical durability (operating cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Product name | Acti9 iDPN N VigiARC |
| Product / component type | Arc fault detection RCBO |
| Product range / family | Acti9 |
| Device short name | iDPN N VigiARC |
| Parameter | Value |
|---|---|
| Mounting support | DIN rail |
| Mounting mode | Clip-on |
| Control type | Toggle |
| Width in 9 mm modules | 4 |
| Terminal connections | Tunnel type terminal for 2 cable(s) 2.5 mm² rigid Tunnel type terminal for 1 cable(s) 16 mm² rigid Tunnel type terminal for 2 cable(s) 2.5 mm² flexible Tunnel type terminal for 1 cable(s) 10 mm² flexible |
| Wire stripping length | 14 mm |
| Terminal tightening torque | 2 N.m |
| Width | 36 mm |
| Height | 91 mm |
| Depth | 75 mm |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -25...60 °C |
| Storage ambient temperature | -40...80 °C |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Pollution degree | 2 conforming to AS/NZS 61009.1 2 conforming to IEC 62606 |
| Relative humidity | 95 % at 55 °C |
| Operating altitude | 2000 m |
| Tropicalisation | Severity B conforming to IEC 60068-2-30 for 28 d |
| Parameter | Value |
|---|---|
| Standards | EN/IEC 62606 AS/NZS 61009.1 |
Rated breaking capacity is 6 kA at 240 V AC, 50 Hz, per AS/NZS 61009.1.
Neutral on the left, cable entry top and bottom. Tightening torque 2 N·m; strip length 14 mm. IP20 finger-safe front, pollution degree 2 — standard for enclosed distribution boards. Tropicalisation severity B per IEC 60068-2-30 (28-day damp heat cycle) means it holds up in coastal or high-humidity plant rooms without derating.
Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for the latest position.
Within the same Acti9 iDPN N VigiARC family, the primary variant difference is the rated current — this 16 A unit is the common size for general-purpose final subcircuits. A higher or lower current rating (e.g. 10 A or 20 A) in the same form factor would be the closest alternative if the load profile changes, but the 16 A is the standard for 10 A socket circuits and lighting.
The part is certified to EN/IEC 62606 and AS/NZS 61009.1 for RCBOs, carries RCM marking for Australia/New Zealand, and is tropicalised per IEC 60068-2-30. Standard Schneider Electric declarations of conformity and test certificates are available for the Acti9 series covering these standards.