Skip to main content
Log in
Schneider Electric A9T27616 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9T27616 Acti9 iDPN H VigiArc, 16 A C-cur

MPNA9T27616
Active

Schneider Electric Acti9 iDPN H VigiArc RCBO, 1P+N, 16 A, C-curve, 10 kA at 240 V AC, integrated earth-leakage, thermal-magnetic trip.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9T27616 — Residual Current Protection
ParameterValue
Earth-leakage protection class / typeClass A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage dependent
Trip unit technologyThermal-magnetic
Local signalling / indicationON, OFF, fault trip
A9T27616 — Electrical Ratings
ParameterValue
Rated current (In)16 A
Rated operational voltage (Ue)230/240 V AC 50 Hz conforming to AS/NZS 61009.1 230/240 V AC 50 Hz conforming to IEC 62606
Poles description1P + N
Neutral pole positionLeft
Network typeAC
Network frequency50 Hz
Rated insulation voltage (Ui)250 V AC 50 Hz between phase and neutral 400 V AC 50 Hz between phases
Rated impulse withstand voltage (Uimp)4 kV conforming to AS/NZS 61009.1
Overvoltage categoryIII
Device location in systemOutgoer
Electrical durability20000 cycles 240 V AC 50 Hz conforming to AS/NZS 61009.1
Mechanical durability (operating cycles)20000 cycles
A9T27616 — Identification
ParameterValue
Product nameActi9 iDPN H VigiARC
Product / component typeArc fault detection RCBO
Product range / familyActi9
Device short nameiDPN H VigiARC
A9T27616 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsTunnel type terminal for 2 cable(s) 2.5 mm² rigid Tunnel type terminal for 1 cable(s) 16 mm² rigid Tunnel type terminal for 2 cable(s) 2.5 mm² flexible Tunnel type terminal for 1 cable(s) 10 mm² flexible
Wire stripping length14 mm
Terminal tightening torque2 N.m
Width36 mm
Height91 mm
Depth75 mm
A9T27616 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree2 conforming to AS/NZS 61009.1 2 conforming to IEC 62606
Relative humidity95 % at 55 °C
Operating altitude2000 m
TropicalisationSeverity B conforming to IEC 60068-2-30 for 28 d
A9T27616 — Approvals
ParameterValue
StandardsEN/IEC 62606 AS/NZS 61009.1

Product details

Breaking capacity is 10 kA at 240 V AC, 50 Hz, certified to AS/NZS 61009.1.

Integrated earth-leakage and trip technology

Earth-leakage protection is built in — no separate RCCB needed upstream. The trip unit is thermal-magnetic: a bimetal strip handles overloads (slow, heat-dependent), and a solenoid handles short-circuits (instantaneous above the magnetic threshold). The VigiArc designation indicates this is the arc-fault detection variant, compliant with EN/IEC 62606 and AS/NZS 61009.1. Local signalling shows ON, OFF, and fault trip states via the toggle.

Pollution degree 2 (suitable for non-conductive pollution with occasional condensation) and overvoltage category III (distribution board level). IP20 finger-safe front. Electrical and mechanical durability both rated at 20,000 cycles. Power loss per pole is 3.4 W at rated current.

Frequently asked questions

What compliance standards does A9T27616 meet?

It meets EN/IEC 62606 and AS/NZS 61009.1 for arc-fault detection and RCBO performance. RCM marked. Tropicalised per IEC 60068-2-30 severity B.

MPN
A9T27616