Skip to main content
Log in
Schneider Electric A9Z02263 — Residual Current Breakers (RCCB/RCBO)

Schneider Electric A9Z02263 Acti9 ID K RCCB, 63A 30mA Type A

MPNA9Z02263
Active

Schneider Electric Acti9 ID K, RCCB, 2P, 63 A, 30 mA Type A, clip-on DIN rail, 220–240 V AC, EN/IEC 61008-1.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9Z02263 — Residual Current Protection
ParameterValue
Earth-leakage sensitivity (IΔn)30 mA
Earth-leakage protection class / typeType A
Earth-leakage trip time delayInstantaneous
Residual-current tripping technologyVoltage independent
A9Z02263 — Electrical Ratings
ParameterValue
Rated current (In)63 A
Rated operational voltage (Ue)220...240 V AC 50 Hz
Poles description2P
Neutral pole positionLeft
Network typeAC
Network frequency50/60 Hz
Rated insulation voltage (Ui)440 V AC 50 Hz
Rated impulse withstand voltage (Uimp)4 kV
Device location in systemOutgoer
Electrical durabilityAC-1: 2000 cycles
Mechanical durability (operating cycles)5000 cycles
A9Z02263 — Identification
ParameterValue
Product nameActi9 ID K
Product / component typeResidual current circuit breaker (RCCB)
Product range / familyActi9
Device short nameID K
A9Z02263 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Control typeToggle
Width in 9 mm modules4
Terminal connectionsBiconnect top or bottom 1...35 mm² rigid Biconnect top or bottom 1...25 mm² flexible
Wire stripping length14 mm for top or bottom connection
Terminal tightening torque3.5 N.m top or bottom
Width36 mm
Height81 mm
Depth68 mm
A9Z02263 — Environmental
ParameterValue
Operating ambient temperature-5...40 °C
Storage ambient temperature-30...70 °C
IP degree of protectionIP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
Pollution degree2
A9Z02263 — Approvals
ParameterValue
StandardsEN/IEC 61008-1 EN/IEC 61008-2-1

Product details

The Schneider Electric A9Z02263 is a 2-pole residual current circuit breaker (RCCB) from the Acti9 ID K range, rated 63 A with 30 mA earth-leakage sensitivity, Type A. Rated operational voltage is 220–240 V AC at 50/60 Hz, with an insulation voltage of 440 V AC and impulse withstand of 4 kV. The 30 mA sensitivity covers personnel protection (indirect contact) per EN/IEC 61008-1, and the Type A classification means it detects pulsating DC residual currents — relevant for circuits feeding electronics or rectified loads.

Mounting and connection details

Width is 36 mm (4 x 9 mm pitches). Terminals accept 1–35 mm² rigid or 1–25 mm² flexible cable, with a stripping length of 14 mm and tightening torque of 3.5 N·m. Biconnect terminals allow looping in/out without separate links.

IP20 on the body, IP40 in a modular enclosure per IEC 60529. Operating temperature range -5 to 40 °C, storage -30 to 70 °C. Pollution degree 2. Certified to EN/IEC 61008-1 and EN/IEC 61008-2-1, with VDE quality label. The device is voltage-independent for the residual current trip — no auxiliary supply needed for earth-fault detection.

Frequently asked questions

Where can I buy A9Z02263 and what is the lead time?

A9Z02263 is sourced to order through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm lead time.

What is the closest alternative to A9Z02263 in the Acti9 family?

Within the Acti9 ID K range, the primary difference between variants is the rated current (In) and sensitivity. The A9Z02263 is a 63 A, 30 mA Type A 2P unit. A lower-current sibling (e.g., 40 A) or different sensitivity (e.g., 100 mA) would change the protection coordination — verify the branch circuit load and earth-leakage requirements before substituting.

What compliance documentation does Schneider provide for A9Z02263?

The A9Z02263 is certified to EN/IEC 61008-1 and EN/IEC 61008-2-1, carries a VDE quality label, and is rated for pollution degree 2. RoHS and REACH declarations are standard from Schneider for this Acti9 series; request them with your order.

MPN
A9Z02263