Schneider Electric ATV32HU22N4437
MPNATV32HU22N4437
Obsolete
variable speed drive ATV32 - 2.2kW 400 V - 3P - Bluetooth built-in - w heat sink
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Connector type | 1 RJ45 (on front face) for Modbus/CANopen |
| Protection type | Input phase breaks: drive Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive |
| Range of product | Altivar 32 |
| Analogue input type | AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Discrete input type | Programmable (sink/source) (LI1...LI4)24...30 V DC, with level 1 PLC Programmable as pulse input 20 kpps (LI5)24...30 V DC, with level 1 PLC Switch-configurable PTC probe (LI6)24...30 V DC Safe torque off (STO)24...30 V DC - 1500 Ohm |
| Analogue output type | AO1 software-configurable current 0...20 mA, impedance: 800 Ohm, resolution 10 bits AO1 software-configurable voltage 0...10 V, impedance: 470 Ohm, resolution 10 bits |
| Discrete output type | Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles Configurable relay logic: (R2A, R2B) NO - 100000 cycles Logic: (LO) |
| Type of polarization | No impedance for Modbus |
| Product or component type | Variable speed drive |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 323...550 V |
| Supply voltage | 380...500 V - 15...10 % |
All specifications
| Parameter | Value |
|---|---|
| Line current | 6.6 A for 500 V 3 phases 2.2 kW / 3 hp 8.7 A for 380 V 3 phases 2.2 kW / 3 hp |
| Nominal output current | 5.5 A at 4 kHz 500 V 2.2 kW / 3 hp |
| Maximum switching current | R1: 3 A at 250 V AC resistive load, cos phi = 1 R1: 4 A at 30 V DC resistive load, cos phi = 1 R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4 R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4 R2: 5 A at 250 V AC resistive load, cos phi = 1 R2: 5 A at 30 V DC resistive load, cos phi = 1 |
| Maximum transient current | 8.3 A for 60 s 2.2 kW / 3 hp |
| Minimum switching current | 5 mA at 24 V DC for configurable relay logic |
| Apparent power | 5.7 kVA at 500 V 3 phases 2.2 kW / 3 hp |
| Motor power | 2.2 kW at 380...480 V |
| Output frequency | 0.0005...0.599 kHz |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| Switching frequency | 2...16 kHz adjustable |
| Nominal switching frequency | 4 kHz |
| Network number of phases | 3 phases |
| IP degree of protection | IP20 conforming to EN/IEC 61800-5-1 |
| Physical interface | 2-wire RS 485 for Modbus |
| Communication port protocol | Modbus CANopen |
| Electrical connection | Screw terminal, clamping capacity: 0.5...1.5 mm², AWG 18...AWG 14 (control) Removable screw terminals, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 12 (motor/braking resistor) Screw terminal, clamping capacity: 1.5...4 mm², AWG 14...AWG 10 (power supply) |
| Response time | LI1...LI6 8 ms, tolerance +/- 0.7 ms for logic output(s) R1A, R1B, R1C 2 ms for relay output(s) R2A, R2C 2 ms for relay output(s) |
| EMC filter | Class C2 EMC filter integrated |
| Pollution degree | 2 conforming to EN/IEC 61800-5-1 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3 |
| Operating altitude | 1000...3000 m with current derating 1 % per 100 m |
| Vibration resistance | 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6 |
| Depth | 245 mm |
| Width | 60 mm |
| Height | 325 mm |
| Product weight | 3 kg |
| Standards | EN 61800-3 environments 2 category C2 EN/IEC 61800-3 EN 61800-3 environments 1 category C2 EN 55011 class A group 1 EN/IEC 61800-5-1 |
| Supply | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Marking | CE |
| Accuracy | +/- 0.2 % (AI1, AI2, AI3) for a temperature of -10...60 °C +/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C +/- 1 % (AO1) for a temperature of 25 °C +/- 2 % (AO1) for a temperature of -10...60 °C |
| Insulation | Electrical between power and control |
| Noise level | 43 dB conforming to 86/188/EEC |
| Option card | Communication card for CANopen daisy chain Communication card for CANopen open style Communication card for DeviceNet Communication card for EtherNet/IP Communication card for Profibus DP V1 |
| Speed range | 1...100 for asynchronous motor in open-loop mode |
| Functionality | Mid |
| Assembly style | With heat sink |
| Braking torque | <= 170 % with braking resistor |
| Component name | ATV32 |
| Speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Linearity error | +/- 0.2...0.5 % of maximum value (AI1, AI2, AI3) +/- 0.3 % (AO1) |
| Regulation loop | Adjustable PID regulator |
| Torque accuracy | +/- 15 % |
| Local signalling | 1 LED red for drive voltage 1 LED blue for bluetooth 1 LED green for CANopen run 1 LED red for CANopen error 1 LED red for drive fault |
| Method of access | Slave CANopen |
| Sampling duration | 2 ms (AI1, AI2, AI3) - analog input(s) 2 ms (AO1) - analog input(s) |
| Tightening torque | 0.5 N.m, 4.4 lb/ft (control) 0.7 N.m, 7.1 lb/ft (motor/braking resistor) 0.6 N.m, 5.3 lb/ft (power supply) |
| Function available | Configure over bluetooth |
| Operating position | Vertical +/- 10 degree |
| Transmission frame | RTU for Modbus |
| Number of addresses | 1...127 for CANopen 1...247 for Modbus |
| Product destination | Synchronous motors Asynchronous motors |
| Discrete input logic | Negative logic (sink) (LI1...LI6), > 19 V (state 0), < 13 V (state 1) Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1) |
| Prospective line isc | 5 kA for 3 phases |
| Specific application | Other applications |
| Transient overtorque | 170...200 % |
| Analogue input number | 3 |
| Braking to standstill | By DC injection |
| Discrete input number | 7 |
| Analogue output number | 1 |
| Discrete output number | 3 |
| Motor slip compensation | Automatic whatever the load Not available in voltage/frequency ratio (2 or 5 points) Adjustable 0...300 % |
| Product specific application | Complex machines |
| Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Synchronous motor control profile | Vector control without sensor |
| Asynchronous motor control profile | Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor - Energy Saving, NoLoad law Flux vector control without sensor, standard Voltage/frequency ratio, 5 points Voltage/frequency ratio, 2 points |
| Acceleration and deceleration ramps | Deceleration ramp automatic stop DC injection Deceleration ramp adaptation Linear CUS U Ramp switching S |
| Ambient air temperature for storage | -25...70 °C |
| Ambient air temperature for operation | -10...50 °C without derating 50...60 °C with derating factor |
MPN
ATV32HU22N4437