Skip to main content
Log in
Schneider Electric ATV32HU40N4158 — AC Drive (VFD) 480V

Schneider ATV32HU40N4158 Altivar 32 Drive, 4 kW, 5 hp, 380-4

MPNATV32HU40N4158
Obsolete

Schneider Electric Altivar 32, ATV32HU40N4158, variable speed drive, 4 kW / 5 hp at 380-480 V, integrated Class C2 EMC filter, 245 x 60 x 325 mm.

Schneider Electric ATV32HU40N4158 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ATV32HU40N4158 — Identification
ParameterValue
Product typeVariable speed drive
Product range / familyAltivar 32
ATV32HU40N4158 — Power & Output
ParameterValue
Motor power (kW)4 kW at 380...480 V
Max. transient current14.3 A for 60 s 4 kW / 5 hp
Apparent power9.1 kVA at 500 V 3 phases 4 kW / 5 hp
ATV32HU40N4158 — Input / Supply
ParameterValue
Rated supply voltage range380...500 V - 15...10 %
Input line current10.5 A for 500 V 3 phases 4 kW / 5 hp 13.7 A for 380 V 3 phases 4 kW / 5 hp
Network number of phases3 phases
Internal/auxiliary suppliesInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
ATV32HU40N4158 — Control & Performance
ParameterValue
Asynchronous motor control modesVoltage/frequency ratio, 5 points Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor, standard Voltage/frequency ratio, 2 points Flux vector control without sensor - Energy Saving, NoLoad law
Synchronous motor control modesVector control without sensor
ATV32HU40N4158 — Protection & EMC
ParameterValue
Integrated EMC filter classClass C2 EMC filter integrated
Protection functionsInput phase breaks: drive Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: drive
EMC immunity tests1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Prospective short-circuit current (Isc)5 kA for 3 phases
ATV32HU40N4158 — Mechanical & Cooling
ParameterValue
IP degree of protectionIP20 conforming to EN/IEC 61800-5-1
Acoustic noise level45 dB conforming to 86/188/EEC
Assembly / installation styleWith heat sink
ATV32HU40N4158 — Environmental
ParameterValue
Operating ambient temperature-10...50 °C without derating 50...60 °C with derating factor
Operating altitude1000...3000 m with current derating 1 % per 100 m
Relative humidity5...95 % without condensation conforming to IEC 60068-2-3 5...95 % without dripping water conforming to IEC 60068-2-3
Storage / transport temperature-25...70 °C
Pollution degree2 conforming to EN/IEC 61800-5-1
Vibration resistance1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
ATV32HU40N4158 — Approvals
ParameterValue
Certifications & markingCE
Standards complianceEN 61800-3 environments 2 category C2 EN/IEC 61800-5-1 EN 61800-3 environments 1 category C2 EN 55011 class A group 1 EN/IEC 61800-3
ATV32HU40N4158 — Communication
ParameterValue
Communication protocolsCANopen Modbus

Product details

The Schneider Electric ATV32HU40N4158 is an Altivar 32 variable speed drive rated for 4 kW / 5 hp at 380-480 V three-phase. It carries an integrated Class C2 EMC filter, which covers both environment 1 and environment 2 per EN 61800-3, so it meets the conducted emission limits for most industrial and light commercial installations without an external filter.

Output frequency range is 0.0005 to 0.599 kHz. The drive includes an adjustable PID regulator for closing a loop on pressure, flow, or level without an external controller. Braking torque reaches up to 170 % with an external braking resistor, which matters for overhauling loads or fast deceleration profiles. The drive protects against input phase loss, output phase-to-earth faults, overcurrent, and motor overheating — all built in, no add-on modules needed. Communication is via the front RJ45 for Modbus and CANopen; optional plug-in cards add DeviceNet, EtherNet/IP, or Profibus DP V1. The 10.5 V DC reference supply (1 to 10 kOhm pot, <10 mA) is short-circuit protected, so wiring a speed pot is straightforward.

The drive measures 245 mm deep by 60 mm wide by 325 mm tall, with a heat-sink assembly. Control wiring torque is 0.5 N·m; power and motor terminals take 0.6–0.7 N·m.

Frequently asked questions

What compliance documentation does this drive carry?

The drive is CE marked and complies with EN 61800-3 (environments 1 and 2, category C2), EN/IEC 61800-5-1, and EN 55011 Class A Group 1. The integrated C2 EMC filter covers conducted emissions for most industrial installations.

What are the key ratings for the ATV32HU40N4158?

It is rated for 4 kW / 5 hp at 380-480 V three-phase, with an output frequency range of 0.0005 to 0.599 kHz. It includes an integrated Class C2 EMC filter, adjustable PID regulator, and supports braking torque up to 170 % with an external resistor.

What communication options does this drive support?

The drive has a front RJ45 for Modbus and CANopen. Optional plug-in communication cards add CANopen daisy chain, DeviceNet, EtherNet/IP, or Profibus DP V1.

MPN
ATV32HU40N4158