The Bosch Rexroth BMI0702T02A is a single-phase servo motor rated for 700 W at 230 VAC (400 W at 115 VAC) with a nominal speed of 4000 rpm (1700 rpm at 115 V). Its absolute multiturn SinCos Hiperface feedback provides high-resolution position tracking without a backup battery, and the integrated EMC filter reduces external line noise – typical for a 2-stack, 10-pole motor in an IP65 housing.
Mounting and electrical connection – what the flange and connector tell you
The motor flange measures 70 mm square with a 60 mm centring collar and 0.4 in (11 mm) shaft – untapped, meaning no threaded hole for a drawbar or coupling setscrew. The shaft length is 0.9 in (23 mm), typical for a direct coupling fit. Four mounting holes at 5.5 mm diameter on the flange. Electrical connection is via a printed circuit board connector – no field-wiring terminals; your cable assembly must terminate to a mating PCB header. No second shaft end, no holding brake, and cooling is by natural convection only: do not block the housing fins.