Skip to main content
Log in
Schneider Electric C25H4TM160C — Miniature Circuit Breakers (MCB)

Schneider Electric C25H4TM160C ComPacT NSX 160A MCCB, 70kA 4

MPNC25H4TM160C
Active

Schneider Electric ComPacT NSX, NSX250H frame, 4P, 160 A thermal-magnetic TM-D trip unit, 70 kA Icu at 415 V AC, toggle control, EN/IEC 60947-2.

Schneider Electric C25H4TM160C datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

C25H4TM160C — Identification
ParameterValue
Product nameComPacT NSX
Product rangeComPacT
Product/component typeCircuit breaker
Device applicationDistribution
C25H4TM160C — Ratings
ParameterValue
Rated current (In)160 A at 50 °C
Poles configuration4P
Breaking capacity100 kA Icu at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 70 kA Icu at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 65 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 35 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2 10 kA Icu at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity (Ics)100 kA at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 70 kA at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 65 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 35 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2 10 kA at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)690 V AC 50/60 Hz
Rated insulation voltage (Ui)800 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)8 kV
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A
Overvoltage categoryIII
C25H4TM160C — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)20000 cycles at 440 V In/2 10000 cycles at 440 V In 10000 cycles at 690 V In/2 5000 cycles at 690 V In
Mechanical durability (cycles)20000 cycles
C25H4TM160C — Mechanical
ParameterValue
Mounting supportBackplate
Control typeToggle
C25H4TM160C — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-50...85 °C
IP degree of protectionIP40 conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Relative humidity0...95 %
C25H4TM160C — Approvals
ParameterValue
StandardsEN/IEC 60947-2
C25H4TM160C — Specifications
ParameterValue
[Ir] long-time protection pick-up adjustment range0.7...1 x In
Trip unit protection functionsLI

Product details

It is rated for distribution duty and carries a 70 kA Icu at 380/415 V AC 50/60 Hz per EN/IEC 60947-2, with the breaking capacity curve extending from 100 kA at 220/240 V down to 10 kA at 660/690 V. The thermal-magnetic trip provides L (overload, thermal) and I (short-circuit, magnetic) protection, with the neutral protection set to 1 x Ir (4D). This is a current-production part.

The 4-pole configuration with neutral left and 1 x Ir neutral protection suits TN and TT systems where full neutral protection is specified.

Durability and environmental rating

Mechanical endurance is 20,000 cycles; electrical endurance at 440 V In is 10,000 cycles, halved at 690 V In. That is typical for a distribution MCCB — adequate for a main or feeder breaker that operates infrequently, not for a motor-switching role. The IP40 enclosure protection and IK07 impact resistance (IEC 62262) suit indoor panel installation where dust ingress is limited. Operating altitude is 0–2000 m without derating, with derating required above that.

Overvoltage category III and utilisation category A confirm its place in fixed-installation distribution boards. The 86 mm depth and 161 mm height fit standard NSX cutouts; the 140 mm width for the 4P version is wider than the 3P variant — verify panel door clearance before specifying.

Frequently asked questions

What is C25H4TM160C's breaking capacity at 415 V AC?

70 kA Icu at 380/415 V AC 50/60 Hz conforming to IEC 60947-2. The full breaking capacity curve ranges from 100 kA at 220/240 V down to 10 kA at 660/690 V.

What compliance documentation does this brand provide for C25H4TM160C?

The breaker is certified to EN/IEC 60947-2 and carries an IP40 rating per IEC 60529, IK07 per IEC 62262, and pollution degree 3 per IEC 60664-1. Suitability for isolation is confirmed per EN/IEC 60947-2.

MPN
C25H4TM160C