Skip to main content
Log in
Schneider Electric C25H4TM200C — Miniature Circuit Breakers (MCB)

Schneider Electric C25H4TM200C ComPacT NSX250H, 200 A, 70 kA

MPNC25H4TM200C
Active

Schneider Electric ComPacT NSX NSX250H, 200 A, 4P, thermal-magnetic TM-D trip unit, 70 kA Icu at 415 V AC, EN/IEC 60947-2.

Schneider Electric C25H4TM200C datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

C25H4TM200C — Identification
ParameterValue
Product nameComPacT NSX
Product rangeComPacT
Product/component typeCircuit breaker
Device applicationDistribution
C25H4TM200C — Ratings
ParameterValue
Rated current (In)200 A at 50 °C
Poles configuration4P
Breaking capacity100 kA Icu at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 70 kA Icu at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 65 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 35 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2 10 kA Icu at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity (Ics)100 kA at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 70 kA at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 65 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 35 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2 10 kA at 660/690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)690 V AC 50/60 Hz
Rated insulation voltage (Ui)800 V AC 50/60 Hz
Rated impulse withstand voltage (Uimp)8 kV
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A
Overvoltage categoryIII
C25H4TM200C — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Earth-leakage protectionWithout
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)20000 cycles at 440 V In/2 10000 cycles at 440 V In 10000 cycles at 690 V In/2 5000 cycles at 690 V In
Mechanical durability (cycles)20000 cycles
C25H4TM200C — Mechanical
ParameterValue
Mounting supportBackplate
Control typeToggle
C25H4TM200C — Environmental
ParameterValue
Operating ambient temperature-25...70 °C
Storage ambient temperature-50...85 °C
IP degree of protectionIP40 conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Relative humidity0...95 %
C25H4TM200C — Approvals
ParameterValue
StandardsEN/IEC 60947-2
C25H4TM200C — Specifications
ParameterValue
[Ir] long-time protection pick-up adjustment range0.7...1 x In
Trip unit protection functionsLI

Product details

The C25H4TM200C is a Schneider Electric ComPacT NSX250H moulded-case circuit breaker with a 200 A thermal-magnetic trip unit (TM-D) and a 4-pole (4P) configuration.

The breaking capacity curve is the deciding factor for panel coordination. At 220/240 V AC the C25H4TM200C delivers 100 kA Icu; at 380/415 V AC it holds 70 kA Icu; at 440 V AC it drops to 65 kA Icu; at 500 V AC to 50 kA Icu; at 525 V AC to 35 kA Icu; and at 660/690 V AC to 10 kA Icu. The utilisation category is A, meaning it is not intended for frequent switching of motor loads — it is a distribution breaker, sized for feeder and branch-circuit protection where the fault current the source can deliver is the binding constraint.

Mounting and physical integration

Dimensions are 161 mm high by 140 mm wide by 86 mm deep. IP40 enclosure protection keeps dust and tools out; IK07 impact resistance handles incidental knocks during panel assembly.

MPN
C25H4TM200C