BOM / RFQ

Schneider Electric LP2K12017MD — Contactors

Schneider TeSys K LP2K12017MD Reversing Contactor, 12 A, 220

MPNLP2K12017MD

Obsolete

Schneider Electric TeSys K series, reversing contactor LP2K12017MD, 3 poles, AC-3 rated 12 A at 440 V, 220 V DC coil, 1 NC auxiliary contact, IP20.

Add to RFQ

Schneider Electric LP2K12017MD datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LP2K12017MD — Identification
Parameter	Value
Product / component type	Reversing contactor
Series / range	TeSys
Application	Resistive load Motor control

LP2K12017MD — Ratings & Performance
Parameter	Value
Rated operational voltage (Ue)	Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation category	AC-1 AC-4 AC-3

LP2K12017MD — Contacts & Poles
Parameter	Value
Pole configuration	3P

LP2K12017MD — Environmental
Parameter	Value
IP degree of protection	IP20 conforming to VDE 0106
Operating altitude	2000 m without derating
Mechanical robustness	Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degree	TC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardance	V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102

LP2K12017MD — Mechanical
Parameter	Value
Width	90 mm
Height	58 mm
Depth	57 mm

Product details

It's a 3-pole (3P) contactor with 3 NO main poles, rated for AC-1, AC-3, and AC-4 utilization categories. The headline rating: AC-3 duty at 440 V, 12 A — meaning it's sized for reversing a small motor load, like a conveyor or pump, up to that current. The coil is 220 V DC, so verify your control voltage matches; the 1 NC auxiliary contact is built in.

AC-3 rating is 12 A at 440 V for motor switching. AC-1 and AC-4 ratings are also listed. The 220 V DC coil requires a matching DC supply. IP20 requires panel mounting. Operating altitude is 2000 m without derating.