Skip to main content
Log in
Schneider Electric LP2K1201CD3 — Contactors

Schneider TeSys K LP2K1201CD3 Reversing Contactor, 12 A AC-3

MPNLP2K1201CD3
Obsolete

Schneider Electric TeSys K reversing contactor, 3P, AC-3 ≤440 V 12 A, 1 NC, 36 V DC coil, IP20.

Schneider Electric LP2K1201CD3 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LP2K1201CD3 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control Resistive load
LP2K1201CD3 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-1 AC-3 AC-4
LP2K1201CD3 — Contacts & Poles
ParameterValue
Pole configuration3P
LP2K1201CD3 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP2K1201CD3 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The LP2K1201CD3 is a TeSys K reversing contactor from Schneider Electric — a 3-pole unit rated for AC-3 motor duty at 12 A up to 440 V, with a 36 V DC coil and one NC auxiliary contact. It ships preassembled with the reversing power busbar, so you're not piecing together the mechanical interlock and copper link on the bench. The AC-3 rating is 12 A at ≤440 V for motor switching. The AC-1 rating covers resistive loads at the same current.

This part is listed as Obsolete by Schneider Electric. Supply path is surplus or broker channel — quoted against an RFQ.

Frequently asked questions

What are the key ratings of LP2K1201CD3?

It is a 3-pole reversing contactor with a 36 V DC coil, rated 12 A in AC-3 duty at ≤440 V for motor control, and 1 NC auxiliary contact. It carries IP20 protection and V1 flame retardance per UL 94.

What is the depth of LP2K1201CD3?

57 mm.

What is the range of LP2K1201CD3?

TeSys K.

MPN
LP2K1201CD3