The 24 VDC coil draws 6 A at rated voltage, so it's a direct fit for standard 24 V control circuits common in industrial automation.
The coil is rated 6 A at 24 VDC, which means at full pull-in it draws about 144 W — well within the capacity of a typical 24 VDC power supply in a panel. The contactor is rated for AC-3 duty (motor starting) with a mechanical life of 10,000,000 cycles, so it's built for frequent cycling on conveyor or pump applications. The main contacts accept solid or stranded wire from 0.5 to 4 mm², which covers standard motor feeder cables up to about 2.5 mm² for a 3–4 kW motor.
At 45 mm wide, 58 mm tall, and 117 mm deep, this contactor takes up minimal DIN rail space — about the width of two miniature circuit breakers.