Skip to main content
Siemens 3RT7046-1AN20 — Contactors

Siemens 3RT7046-1AN20 SIRIUS Contactor, 3-Pole, 690 V AC-3,

MPN3RT7046-1AN20

Siemens SIRIUS 3RT7046-1AN20, size S3 3-pole contactor, 690 V AC-3 rated voltage, 6 A at 230 V, screw terminals, IP20 front, IP00 terminals.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3RT7046-1AN20 — Identification
ParameterValue
Contactor frame sizeS3
3RT7046-1AN20 — Ratings & Performance
ParameterValue
Rated value @ 400 V3 A
Rated value @ 690 V1 A
Rated value @ 230 V6 A
3RT7046-1AN20 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.27
Rated value @ 50 Hz220 V
3RT7046-1AN20 — Contacts & Poles
ParameterValue
Main poles3
Main NO contacts3
Auxiliary contact reliabilityacceptability for PLC control (17 V, 5 mA)
3RT7046-1AN20 — Protection & Coordination
ParameterValue
Short-circuit coordination type 1, fusegL/gG NH 3NA: 200 A
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RT7046-1AN20 — Connection & Mounting
ParameterValue
Main circuit connectionscrew-type terminals
Aux. / control circuit connectionscrew-type terminals
Conductor cross-section, solid or stranded2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Mounting methodscrew and snap-on mounting onto 35 mm and 75 mm standard mounting rail
Side-by-side mountingYes
3RT7046-1AN20 — Environmental
ParameterValue
Operating temperature range-10 ... +55 °C
Storage temperature range-25 ... +70 °C
Installation altitude, max.2 000 m
3RT7046-1AN20 — Mechanical
ParameterValue
Width70 mm
Height148 mm
Depth139 mm

Product details

SIRIUS 3RT7046-1AN20 — 3-Pole Contactor, S3 Frame, 690 V AC-3

The Siemens 3RT7046-1AN20 is a size S3 3-pole contactor from the SIRIUS family, rated for AC-3 switching up to 690 V. It carries 6 A at 230 V, 3 A at 400 V, and 1 A at 690 V — so the load current drops as line voltage rises, which is typical for motor-switching duty where the AC-3 rating governs the real motor FLA it can handle.

Switching Performance and Coil

Rated for 800 operations per hour at AC-3 maximum and 250 per hour at AC-4 maximum — AC-4 is the harder duty (plugging/inching), so the lower limit reflects the increased contact wear. The DC coil draws 0.7 W to close and only 0.29 W to hold, which keeps the control transformer small and the heat dissipation low in a sealed panel.

Protection Coordination

That's a large fuse for a contactor this size — it means the short-circuit withstand is high, so you can feed it from a substantial bus without needing a smaller fuse just to protect the contactor.

Frequently asked questions

What is 3RT7046-1AN20's depth and width?

Depth is 139 mm and width is 70 mm, with a height of 148 mm. The S3 frame size fits standard 35 mm or 75 mm DIN rail.

Will 3RT7046-1AN20 drop into a panel specified around 3RT6026-1AN20 without rewiring?

The 3RT7046-1AN20 is a size S3 frame, while the 3RT6026-1AN20 is a different frame size. The mounting rail (35/75 mm) and terminal type (screw) are the same, but the physical dimensions and terminal spacing differ — expect to re-drill the mounting holes and possibly adjust the wire routing. The coil and auxiliary wiring are not guaranteed to align without a layout check.

MPN
3RT7046-1AN20