Skip to main content
Siemens 5SU1324-7KX10 — Residual Current Breakers (RCCB/RCBO)

Siemens SENTRON 5SU1324-7KX10 RCBO, 2P, 10 A, C-curve, 30 mA

MPN5SU1324-7KX10
Active

Siemens SENTRON 5SU1324-7KX10, RCBO, 2-pole, 10 A rated, C-curve, type A residual current 30 mA, 10 kA (EN 60898) / 20 kA (IEC 60947-2), 110/120 V AC, halogen-free.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

5SU1324-7KX10 — Electrical Ratings
ParameterValue
Number of poles2
Overvoltage categoryIII
5SU1324-7KX10 — Identification
ParameterValue
Product designationRCBO
Product design / constructionInstantaneous
5SU1324-7KX10 — Mechanical
ParameterValue
Mounting positionany
Width in modular units3
Maximum75 °C
Minimum-40 °C
Width54 mm
Height90 mm
Depth77 mm
Installation depth70 mm
5SU1324-7KX10 — Environmental
ParameterValue
IP degree of protectionIP20, if the distribution board is installed, with connected conductors
5SU1324-7KX10 — Electrical
ParameterValue
Tripping Characteristic ClassC

Product details

What this RCBO is and what it protects

The Siemens SENTRON 5SU1324-7KX10 is a 2-pole RCBO — a combined residual-current device (type A, 30 mA trip) and miniature circuit breaker (C-curve, 10 A) in one 3-module-width (54 mm) package. It mounts on DIN rail in any orientation and accepts supply from top or bottom. The 10 kA breaking capacity per EN 60898 covers residential and commercial branch circuits; the 20 kA rating per IEC 60947-2 means it can also handle industrial fault levels where the prospective short-circuit current is higher. The C-curve (5–10× In) is the standard choice for mixed resistive and moderate inductive loads — lighting, small motors, general socket outlets — where nuisance tripping from inrush is unlikely.

Key ratings — what they mean for the panel

Rated operational voltage is 110/120 V AC, 50/60 Hz. The insulation voltage (Ui) is 264 V, and overvoltage category III with pollution degree 2 means it's rated for fixed installation downstream of the main distribution board — not for outdoor or wet locations. Surge voltage resistance is 4 kV, adequate for standard transient protection in residential and light commercial panels. The 30 mA type A residual-current element detects pulsating DC fault currents (typical from rectified loads like electronics or LED drivers) as well as sinusoidal AC faults. Mechanical service life is 10 000 operating cycles, which is typical for a panel-protection device — not a switching contactor.

Mounting and integration

The 5SU1324-7KX10 occupies 3 modular width units (54 mm) on a DIN rail. Installation depth is 70 mm; overall depth with terminals is 77 mm. IP20 rating applies only when installed in a distribution board with connected conductors — the device itself is not sealed against dust ingress. Halogen-free and silicon-free construction matters for panels in environments with sensitive electronics or where low-smoke, zero-halogen cabling is specified. Ambient temperature range is -40 °C to 75 °C, which covers most indoor panel environments including unheated enclosures.

Frequently asked questions

Will 5SU1324-7KX10 drop into a panel designed for 5SL4363-7?

The 5SU1324-7KX10 shares the same 54 mm width and 3 MWU DIN-rail footprint as the 5SL4363-7, so it fits the same panel cutout and busbar spacing. However, the 5SL4363-7 is a 3-pole MCB; the 5SU1324-7KX10 is a 2-pole RCBO. The wiring differs — the RCBO requires both phase and neutral connections plus the residual-current sense loop. No rewiring of the busbar is needed if the panel already has a 2-pole arrangement, but the neutral must be routed through the device.

What compliance documentation is available for 5SU1324-7KX10?

The 5SU1324-7KX10 carries IEC 60898 and IEC 60947-2 ratings, indicating compliance with the respective standards for MCB and RCBO performance. It is halogen-free and silicon-free. Specific RoHS, REACH, UL, and CE declarations are manufacturer-supplied documentation; request them with your RFQ.

How do I get current pricing and availability for 5SU1324-7KX10?

Submit an RFQ through this listing. Availability and current pricing are confirmed at quote time — the part is sourced through independent distribution channels and quoted to order.

MPN
5SU1324-7KX10