The Siemens 6ES7134-6PA01-0CU0 is a 4-channel current and voltage measurement module in the ET 200SP distributed I/O family. It draws 24 V DC from the backplane bus, reports line quality, voltage swells, and dips, and can trigger diagnostic alarms or hardware interrupts for over/under process values. It accepts shielded or unshielded cable runs up to 200 m, with surge strength rated at 10 A for 1 minute on the supply side. The module sits on any BU type U0 base unit and mounts in any orientation. Firmware is V8.0, field-updatable, with I&M data support up to I&M3 for asset management.
Engineering notes for commissioning and wiring
Rated 24 V DC, typical power loss 1.4 W when measuring 4 channels at 6 A and 3 phases at 230 V AC. The maximum secondary-side voltage is 300 V – stay within that limit for the voltage measurement path. Diagnostic alarm and limit value alarm are available for up to 16 selectable process values. The module can detect overflow/underflow but does not support isochronous mode.