Skip to main content
Siemens 6ES7134-6PA01-0CU0

Siemens 6ES7134-6PA01-0CU0 Analog Input ET 200SP, 24V DC

MPN 6ES7134-6PA01-0CU0
Active

Siemens ET 200SP analog input module 6ES7134-6PA01-0CU0, 24 V DC supply, 4 current inputs, firmware V8.0, depth 58 mm.

$203.45 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7134-6PA01-0CU0 specifications
ParameterValue
Depth58 mm
Width20 mm
Height73 mm

Product details

The Siemens 6ES7134-6PA01-0CU0 is a 4-channel current and voltage measurement module in the ET 200SP distributed I/O family. It draws 24 V DC from the backplane bus, reports line quality, voltage swells, and dips, and can trigger diagnostic alarms or hardware interrupts for over/under process values. It accepts shielded or unshielded cable runs up to 200 m, with surge strength rated at 10 A for 1 minute on the supply side. The module sits on any BU type U0 base unit and mounts in any orientation. Firmware is V8.0, field-updatable, with I&M data support up to I&M3 for asset management.

Engineering notes for commissioning and wiring

Rated 24 V DC, typical power loss 1.4 W when measuring 4 channels at 6 A and 3 phases at 230 V AC. The maximum secondary-side voltage is 300 V – stay within that limit for the voltage measurement path. Diagnostic alarm and limit value alarm are available for up to 16 selectable process values. The module can detect overflow/underflow but does not support isochronous mode.

MPN
6ES7134-6PA01-0CU0