IO-Link module for ET 200SP
The 6ES7143-5BF00-0BL0: Current-production IO-Link module for the SIMATIC ET 200SP distributed I/O system. Supplies 8 digital outputs at 24 V DC, total current 0.7 A sourced from the IO-Link master's 2UA+ rail. Rated IP65/67 and SIL 2. Usable on machine frames and in protected zones.
What the ratings mean for fit
Temperature range –30 to 55 °C matches most production environments; no additional cooling needed at the upper end unless you're overloading the total output current. Each output switches signals at 38.4 kBd (COM2) over unshielded cable up to 30 m, with a total cycle time of 2.4 ms. Good for sensor-level on/off, but not for high-speed pulse trains. Critical note: there is no electrical isolation between channels. Plan your encoder ground paths accordingly – a single ground fault on one output can pull down adjacent channels unless you use separate supplies from the master.
Mounting and hookup
Diagnostics via green/red LED and parameterizable diagnostic alarm. IODD file released.