The 6ES7194-2LN10-0AB0 is a preassembled bus cable for connecting ET-CONNECTION nodes like SIMATIC ET 200AL in IP65/67 environments. It comes with two M8 angled plugs, 4-pin, shielded, at a fixed 10 m length. The green PVC sheath houses four PE-insulated cores (white, yellow, blue, orange) with an overlapped aluminum-clad foil and tin-plated copper braid shield — the sort of build that keeps out noise on a long drag chain run.
Temperature range of -40 to 80 °C covers the full operating window — from a frozen warehouse floor to the heat inside a sunny junction box. The 80 °C max is the assembly ambient, not just storage, so you can terminate it in a warm cabinet without derating the cable. The cable is rated for 1 000 000 bending cycles on a cable carrier at 100 mm bend radius, 4 m/s, 4 m/s² acceleration. That is a legitimate drag-chain spec — not a static-dress number. The 90-degree outlet on both M8 plugs means it exits the connector flush against the mounting face, saving space in tight IP65/67 enclosures.