Skip to main content
Siemens 6ES7194-2MH50-0AC0 — PLC I/O & Expansion Modules

SIMATIC 6ES7194-2MH50-0AC0 Bus Cable, 5m, M8, -40–80°C

MPN6ES7194-2MH50-0AC0
Active

Siemens SIMATIC ET 200AL bus cable, 6ES7194-2MH50-0AC0, 5 m, PUR, shielded, pre-assembled one end M8 4-pin, -40 to 80 °C.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

6ES7194-2MH50-0AC0 — Electrical
ParameterValue
Max.80 °C
6ES7194-2MH50-0AC0 — Environmental
ParameterValue
IP protection ratingIP65/67
Min.-40 °C

Product details

The Siemens 6ES7194-2MH50-0AC0 is a 5-meter shielded bus cable, pre-assembled on one end with a 4-pin M8 plug. It is designed to connect SIMATIC ET 200AL distributed I/O nodes in IP65/67 environments, using the ET-CONNECTION system. The cable carries a PUR jacket and is halogen- and silicone-free, so it is suited for industrial areas where outgassing or chemical resistance matters. The shield is an overlapped aluminum-clad foil with a tinned copper braid, giving both foil coverage and braid robustness for noisy field runs. Temperature range spans -40 to 80°C, which covers cold storage floors and hot motor-adjacent drops. For dynamic cable carrier use, it is rated for 1 million bending cycles at a 100 mm bend radius, 4 m/s travel speed, and 4 m/s² acceleration — figures that match typical drag-chain specs on a lube route or small robot cell.

Frequently asked questions

What are the operating temperature limits?

Minimum -40°C, maximum 80°C.

Can this cable be used in a cable carrier (drag chain)?

Yes, it is rated for 1 million bending cycles at a bend radius of 100 mm, a travel speed of 4 m/s, and acceleration of 4 m/s².

What does the cable connect to?

It connects ET-CONNECTION nodes, specifically SIMATIC ET 200AL modules in IP65/67 enclosures. The M8 plug is pre-assembled on one end; the other end is unterminated (field-wire or terminate per ET 200AL manual).

MPN
6ES7194-2MH50-0AC0