The Siemens 6ES7194-2MH50-1AA0 is a flexible power cable preassembled at each end with a 4-pin M8 male connector and a 4-pin M8 female connector, intended for the 24 V DC power supply to ET 200AL distributed I/O stations. The cable is 5 m long, with a gray PE-PUR sheath, and rated IP65/67 when mated — so it can run directly to the module without an enclosure, in washdown or dusty areas. It is halogen-free and silicone-free, which matters for clean-room or fire-safety zones where off-gassing is restricted.
Cable-carrier and temperature handling
Rated for 2 000 000 bending cycles in cable carrier at a bending radius of 51 mm, a speed of 5 m/s, and acceleration of 5 m/s² — a genuine continuous-flex spec, not just a drag-chain fit. Ambient temperature during assembly ranges from -25 °C to +80 °C. The cable is LIF9Y11YFHF 4x 0.50 mm² construction — 4 cores, each 0.5 mm², with PP core insulation and a 5.1 mm outer diameter. Single-bend minimum radius is 26 mm; multiple-bend minimum is 51 mm.