The 6ES7194-2MN10-1AA0: This is a pre-assembled power cable for the Siemens ET 200AL distributed I/O system — a 4-conductor, 10 m run with a 4-pin M8 male on one end and an M8 female on the other, ready to daisy-chain 24 V DC supply between modules. The cable designation is LIF9Y11YFHF 4x 0.50 mm², meaning a fine-stranded, halogen-free, silicone-free PUR-sheathed cable with PP core insulation — the kind of construction that survives in cable carriers and washdown zones.
IP65/IP67 on the connectors means the mated pair seals against hose-directed water and dust ingress — this cable is spec'd for the wet end of a machine, not just a dry cabinet. Rated for 2 million bending cycles in a cable carrier at a 51 mm bend radius, 5 m/s travel speed and 5 m/s² acceleration — this isn't a static patch cord; it's built for continuous flexing on a moving axis. The 180° cable outlet on the connectors means the cable exits straight out the back of the M8 plug and socket — no right-angle heads to plan around in tight raceways. Temperature range of -25 °C to 80 °C covers both cold storage areas and the warm end of a control cabinet; the 80 °C max is the assembly ambient, not just storage.
Cable carrier constraints at a glance
Minimum bending radius for a single, non-repeated bend is 26 mm — useful for the final few centimetres into the connector gland. For continuous flexing in a cable carrier, the minimum radius jumps to 51 mm.