Active production, quoted to the commissioning window
The 6SL3210-1PH23-5UL0: This SINAMICS G120 PM240-2 power module delivers 30 kW low overload (LO) from a 500-690 V AC three-phase supply, with a built-in braking chopper that saves an external resistor for most deceleration profiles.
Overload duty that sets the motor match
High overload (HO) rating is 22 kW with 200 % for 3 seconds, 150 % for 57 seconds, and 100 % for 240 seconds — this covers pump and fan starts that need a torque spike without oversizing the drive. Low overload (LO) rating is 30 kW with 150 % for 3 seconds, 110 % for 57 seconds, and 100 % for 240 seconds — sized for constant-torque conveyors where the peak demand is brief. Ambient temperature range for HO duty is -20 to +50 °C; for LO duty it narrows to -20 to +40 °C, so a warm enclosure shifts the usable power toward the HO curve.
Panel fit and firmware slot
The module measures 472 x 200 x 237 mm (H x W x D) in FSD format, IP20 — it mounts into a standard IP20 cabinet with clearance for the top cable entry and the heatsink airflow. Approved for CU firmware version V4.7 HF8 and higher — confirm the Control Unit firmware matches before commissioning to avoid parameter mapping mismatches. Packaged as a single piece (495 x 356 x 300 mm) with RoHS compliance since 01-01-17 and a REACH candidate-list declaration for lead (CAS 7439-92-1 > 0.1 % w/w).