560 kW at 380-480 V — overload profile for pump and fan loads
The 6SL3220-1YE66-0CP0: This SINAMICS G120X drive delivers 560 kW rated power from a 3-phase 380-480 VAC supply, with an overload capability of 135% for 3 seconds, 110% for 60 seconds, and 100% for 240 seconds — a profile that matches centrifugal pump and fan torque curves where peak demand is brief and sustained overload is rare. The RFI suppression filter is built in for Category C3 environments, meaning the drive is intended for industrial power networks where the supply is hard-wired and not shared with residential feeders. Long motor cable runs stay within conducted emission limits without an external filter.
Cabinet integration — IP20, Size FSJ, PROFIBUS DP onboard
IP20 / UL open type means this drive mounts inside a cabinet — no standalone enclosure rating. The FSJ frame size is the largest in the G120X family; the packaging footprint is 1,200 x 1,857 x 800 mm, so the panel cutout and gland plate need to accommodate that physical envelope plus cable bending radius on the output side. PROFIBUS DP is integrated on the control board — no separate communication module required for plants running a classic fieldbus backbone. No operator panel or IO expansion is included; those are ordered separately if needed.
Compliance and documentation — RoHS, REACH, export
ECCN EAR99H and AL N export classification means no US export license is required for most commercial shipments. The drive is not ITAR-controlled or subject to special nuclear/chemical end-use restrictions.